User's Manual

USB Operations
Connecting a USB memory
device
1. Connect the USB memory device to the
USB cable.
Playback will begin from the first file
recorded on the device.
∗ If the device is not recognized, press the
[SOURCE] button to switch the source to the
device.
∗ Always insert the device fully into the
connector. Incomplete connections may
cause the device not to be recognized.
∗ Depending on the number of tracks recorded,
some amount of time may be required until all
tracks are read into the unit.
∗ The order in which tracks are recorded may
differ depending on the device connected (the
actual playback order may not be the same as
that indicated on your computer’s display).
To listen to tracks on a connected
USB memory device
1. Press the [SOURCE] button to switch the
source. When USB memory device is
selected, playback (except DRM files) will
begin from the location at which playback
was previously stopped.
∗ When a USB memory device is
connected the USB mode will be
displayed.
∗ When a USB memory device is
disconnected and then reconnected, playback
will begin from the beginning of the USB
memory device.
To stop play
1. Press the [SOURCE] button and switch the
function to a source other than the USB
memory.
CAUTION
Do not remove the USB memory device
when the USB mode is selected, since it
may result in loss or damage to data on the
USB memory device.
Always backup and save important data on
your computer.
2. Remove the USB memory device from
the USB cable.
English
25CX501