User's Manual

Bluetooth Operations
English
21CX501
“AUTO”: Automatic adjustment is enabled
in the paired mobile phone.
NOISE
This option is used to set noise volume in the
car bluetooth system.
2-1. Press “NOISE”.
3-1. Turn the [ROTARY] knob to select
“LOW” or “HIGH”.
∗ The factory default setting is “LOW”.
AUTO ANS
This is a setting to determine whether any
incoming call will be automatically or manually
answered.
∗ The factory default setting is “OFF”.
2-1. Select “AUTO ANS”.
3-1. Turn the [ROTARY] knob to select “ON”
or “OFF”.
ON: Any incoming call is automatically
answered in 5 seconds.
OFF: User needs to manually answer the
call.
AUTO CONNECT
This function allows the Bluetooth to be
connected automatically with previously
connected device. Connection can be
established at any source mode.
∗ The factory default setting is “OFF”.
2-1. Select “AUTO CON”.
3-1. Turn the [ROTARY] knob to select “ON”
or “OFF”.
ON: Automatic connection is enabled.
OFF: Automatic connection is disabled.
PASS KEY
This PASS KEY is used during pairing mode. A
maximum of 10 digits can be changed through
the car stereo.
∗ The factory default PASS KEY is “1234”.
2-1. Select “PASS KEY”.
3-1. Press the [ROTARY] knob.
4-1. Press the [x] or [v] button to remove
the cursor.
5-1. Turn the [ROTARY] knob to select the
desired digits.
6-1. Press and hold the [ROTARY] knob
(2 sec.) to store in memory.
∗ If press the [BAND] button, the pass key
returns to the factory default setting.
ADDRESS
This will hold the unique Bluetooth address. The
address is 12 figures.
2-1. Select “ADDRESS”.
The Bluetooth address 6 figures appears in
the display.
3-1. Turn the [ROTARY] button to display.
Bluetooth Name
This will display the name of the Bluetooth.
2-1. Select “BT NAME”.
The Bluetooth name appears in the display.
Bluetooth Firmware version
This will display the firmware version of the
Bluetooth.
2-1. Select “BT FW”.
The Bluetooth firmware version appears in
the display.