User's Manual

Basic Operations
English
10 CX501
2-1. Select “S-W VOL”.
3-1. Turn the [ROTARY] knob to increases
or decreases the subwoofer volume.
∗ The factory default setting is “0”.
(Adjustment range: +6 to –6)
Adjusting the HPF
2-1. Select “HPF”.
3-1. Turn the [ROTARY] knob to select as
following order.
“THROUGH”
“60” “90” “120”
∗ The factory default setting is “THROUGH”.
Adjusting the subwoofer output
volume
You can adjust the volume output from the unit’s
subwoofer output terminal.
This adjustment can be performed only when
the “REAR/S-W” is set to “S-WOOFER”