Owner's Manual

76 Clarion NX807 English
4.3.1.3 Navigation Mode
You can switch between on-road and off-road navigation by tapping and selecting
or (page 64).
4.3.1.4 Road types
To let the route fit your needs, you can also set which road types are to be considered for or to be
excluded from the route.
Excluding a road type is a preference. It does not necessarily mean total prohibition. If your destination
can only be accessed using some of the excluded road types, they are used only as much as necessary.
In this case, a warning icon is shown on the Route information screen, and the part of the route not
matching your preference is displayed in a different color on the map.
The following road types are available:
Button
Description
You might need to avoid freeways when you are driving a slow car or you are
towing another vehicle.
Charge roads are pay roads where you can purchase a pass or vignette to use the
road for a longer period of time. They can be enabled or disabled separately from
toll roads.
Per-use toll roads are pay roads where there is a per-use charge in the routes by
default. If you disable toll roads, NX807 plans the best toll-free route.
NX807
includes ferries in a planned route by default. However, a map does not
necessarily contain information about the accessibility of temporary ferries. You
might also need to pay a fare on ferries.
Car shuttle trains are used to transports vehicles for a relatively short distance and
they usually connect places that are not easily accessible on a road, for exampl
e, in
Switzerland.
Carpool or HOV lanes can be used if a given number of passengers is traveling
in
the vehicle. Check whether you are allowed to use car
pool lanes before enabling
this road type.
NX807 excludes unpaved roads by default. Unpaved roads can be in a bad
condition and you usually cannot reach the speed limit on them.