Owner's Manual

Installing the Main Unit in
TOYOTA Vehicle
Install
by using parts attached to the vehicle. (Screws marked
*are
attached to the
vehicle.)
*1.
Some
panel openings are too
small
for the unit depending on the vehicle type and
model.
In
such a case, trim the
upper
and lower sides
of
the panel frame by about 0.5
to 1.5 mm so the unit can be inserted smoothly.
*2.
If
a
hook
on the
installation
bracket interferes with the unit, bend and flatten it with
a nipper
or
similar tool.
.....-----------
Typical
Mounting Brackets
Example
1
Example
2
Example
3
Affix the
screws to the
e marks.
WIRE CONNECTION
Note:
•
Before
installing,
be sure to disconnect the negative cable
of
the
car
battery.
•
In the optional devices, the RCA cables
and
the Connector cables are separately-
sold
items.
•
When connect the
HOM/
cable,
be
sure to fix with the clamp.
Note:
For prevent the disconnection
of
the
Optical
cable, please fix the cable toNX706 with
vinyl
tie.
Optical
Ca
ble
(Sold
in the market)
NX706
31