Owner's manual NX702E DVD MULTIMEDIA STATION WITH BUILT-IN NAVIGATION & 7” TOUCH PANEL CONTROL
OBS! This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT“. To use this model properly, read this Owner’s Manual carefully and keep this manual for your future reference. In case of any trouble with this player, please contact your nearest “AUTHORIZED service station”. To prevent direct exposure to the laser beam, do not try to open the enclosure. Apparaten innehåller laserkomponenten som avger laserstrålning överstigande gränsen för laserklass 1.
English Contents Thank you for purchasing this Clarion product. • Please fully read this owner’s manual before operating this equipment. • Check the contents of the enclosed warranty card and store it in a safe place with this manual. 1. FEATURES......................................................................................................................... 3 Expanding Systems............................................................................................................ 3 2.
• 7” Wide-VGA colour LCD TOUCH PANEL • 4V/6ch RCA Output with Digital Time Alignment, 3-way Crossover and 5 Band Parametric Equalizer • Built-In DVB-T • Latest Map Guarantee English 1.
English 2. PRECAUTIONS WARNING For your safety, the driver should not operate the controls while driving. Also, while driving, keep the volume to a level at which external sounds can be heard. 1. When the interior of the car is extremely cold and the player is used soon after switching on the heater, moisture may form on the disc or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc, wipe it off with a soft cloth.
English 3. CAUTIONS ON HANDLING Front Panel / Generalities For a longer service life, be sure to read the following cautions. • Do not allow any liquids on the unit from drinks, umbrellas, etc. Doing so may damage the internal circuitry. • Do not disassemble or modify the unit in any way. Doing so may result in damage. • Do not let cigarettes burn the display. Doing so may damage or deform the body. • If a problem should occur, have the unit inspected at your store of purchase.
Handling Discs English Handling Cleaning • New discs may have some roughness around the edges. If such discs are used, the player may not work or the sound may skip. Use a ball-point pen or the like to remove any roughness from the edge of the disc. • To remove fingermarks and dust, use a soft cloth and wipe in a straight line from the center of the disc to the circumference. • Do not use any solvents, such as commercially available cleaners, anti-static spray, or thinner to clean discs.
English 4. CONTROLS Operational Panel Remote Sensor [MAP PWR] [-] [MENU [+] ALL ] [OPEN] RESET [MIC] Press [OPEN] button to slide down the panel. Left Side Front Side Disc Slot [ SD Card Slot ] EJECT MicroSD card slot Only navigation map card is available and don't remove it when unit is power on.
Names of Buttons English [MIC] Hole • Internal microphone [MAP PWR] Knob • Press to power on the system when ignition on. • When power on, press to enter navigation mode. • Press and hold this key more than 1 second to turn off the system. [RESET] Button • Press to load original settings. Note: When the [RESET] button is pressed, frequencies of radio stations, titles, etc. stored in memory are cleared. [MENU ALL] Button • Short press to show/exit shortcut menu.
• [TITLE] Button DVD TITLE MENU • [RPT] Button Repeat playback • [ENT] Button Enter • [RDM] Button Random playback • [ROOT] Button DVD ROOT MENU • • [ ], [ ] Buttons Manual tune Fast backward/forward playback • [SUB.
English Remote Control • • • • • [ / STOP ] Button Play/Pause Stop (long press) [ ], [ ] Buttons RADIO mode • Previous / next preset station • Seek down/up (long press) DVD mode Previous/next chapter. CD/BLUETOOTH mode Previous/next track.
Long press [ MENU ALL ] button on the PANEL to show main source menu. Short press [ MENU Short cut menu. ALL ] button to show Front Zone Source Touch [ - ] on the bottom of screen to show front zone sources. Change page by dragging left or right or touching other two [ - ] buttons. Touch the icons on the screen to enter corresponding work mode, such as Disc mode, USB mode, iPod mode, etc. Touch [2ZoneOff] to turn off the rear zone monitor. English 5.
English 6. SYSTEM SETUP At all mode, long press [ MENU ALL ] button to enter main source menu. Touch [Custom] on the bottom left of the screen, then select [Settings] on the screen to enter Setting menu. Touch the icons on the left of screen to select category: General, Time, Sound, Display or Setup. To exit Setting menu, touch [ ] on the bottom left of the screen. Wallpaper Touch [Set] to the right of “Wallpaper” to show Wallpaper setting menu.
SW LPF (Normal Mode) Touch [Setup] on the right to SW LPF to spread the setting list. Touch buttons on the screen to adjust. Sound X-Over High (2WAY / 3Way Multi Mode) Touch [Setup] on the right to X-Over High to spread the setting list. Touch buttons on the screen to adjust. Beat EQ Touch the button to the right of “Beat EQ” to show EQ setting menu. You can select : “Bass Boost”, “Impact”, “Excite”, “Custom” or “Off”. To adjust the value, touch [-] or [+] button on the screen. Touch [Back] to exit.
Setup English Touch [Setup] on the right of screen to spread the setting list. then touch the button to the right of desired option to adjust or show the sub-menu. Touch [Close] to close the list. • Parental Control Touch the button to the right of “Parental Control” to show parental control menu. Enter password, then select a parental level. Touch [OK] to confirm or [Back] to exit. AUX Navigation • Input Aux Sense Choose “Low”, “Middle“ or “High” input sense of auxiliary device.
English 7. Disc Operation DVD System DVD video is a high-quality digital video source that provides crisp and clear images. One 12 cm disc contains either one film or four hours of music. DVD Video Features This unit provides the following functions in addition to the high image quality and sound quality of DVD video. Notes: • T he functions described in this section, for example, the recorded language, subtitles, angles, etc. differ depending on the DVD video disc.
English sessions recorded cannot be played on this DVD video player. Note: • W hen you have a CD Extra disc, only the first session will be recognized. About playing a CD-R/CD-RW disc (MP3, WMA) This player can play CD-R/CD-RW discs previously recorded in music CD format (MP3, WMA) About playing a DVD-R/RW or DVD+R/ RW disc This player cannot play DVD-R/RW and DVD+R/RW discs previously recorded in video CD format. However, MP3/WMA files recorded on DVD-R/RW and DVD+R/RW discs can be played.
English Accessing a Disc CAUTION For your safety, the driver should not insert or eject a disc while driving. Eject function Press [OPEN] button to slide down the panel, then press the [ ] button to eject the disc even if the power to the unit was not turned on. Notes: • I f you force a disc into before auto reloading, this can damage the disc. • To avoid damaging, remove the disc from the unit after it pops up.
English DVD Player Operation Playback menu Touch the bottom half of screen to show operation bar. 14. 15. 16. 17. 18. 19. Show previous page Turn on Widescreen mode Direct search Adjust picture effect Show playback information Mute indicator Pausing play 1. Touch the [ ] button on the screen to pause play. 2. Touch [ ] button to resume play. Selecting a chapter 1. Play/Pause 2. Show cursor keys in DVD title menu 3. Previous chapter Fast-backward (long press) 4. Progress bar 5.
DVD subtitle select English During playback, touch [ ], [Subtitle] buttons to select the subtitle language if the DVD has multiple language subtitles. Playback information During playback, touch [ ], [ Information ] buttons to view playback information. Adjust picture During playback, touch [ ], [ Adjust Picture ] button, then use [-], [+] buttons to adjust Dimmer/Brightness/Contrast/Color.
English CD Player Operation Playback menu Touch the bottom half of screen to show operation bar. 2. Touch the [ ] button twice to move back to the beginning of the previous track. Fast forward/Fast reverse Fast forward ] button . Touch and hold the [ Fast reverse Touch and hold the [ ] button . * F or MP3/WMA discs, it takes some time until the start of searching and between tracks. In addition, some error may occur in the play time. Search Function 1. 2. 3. 4. 5. 6. 7. 8. 9.
This unit is an ID3 Tag compatible model. This unit supports the ID3 TAGs of the Version 2.4, 2.3, 1.1 and 1.0. In displaying, this unit gives priority to the Version 2.3 and 2.4 TAGs. What is MP3/WMA MP3 is an audio compression method and classified into audio layer 3 of MPEG standards. WMA is an audio compression method developed by Microsoft Corporation. These audio compression methods have penetrated into PC users and become a standard format.
0 ( ) English 1 2 3 5 6 7 ♪① ♪② ♪③ ♪④ ♪⑤ 4 ♪⑥ ♪⑦ ♪⑧ ♪⑨ 10. Scan play 11. Rotate the album image 12. Back to main operation bar ○ Root Folder Folder ♪ File Layer1 Layer 2 Layer 3 Layer 4 Layer5 The player will only recognize three folder levels and does not display folders containing other folders. In the example above, the unit will display folders 2, 3, 5 and 7, but 1 and 6 since they do not contain others.
Playback menu When playing, touch the bottom half of screen to show operation bar. Selecting a file File-up T ouch the [ ] button to move to the beginning of the next file. English MP4/DivX Playback File-down Touch the [ ] button to move back to the beginning of the current or previous file. Fast forward/Fast reverse Fast forward ] button . Hold the [ 1. Play/Pause 2. Repeat playback 3. Previous file Fast reverse (long press) 4. Progress bar 5. Next file Fast forward (long press) 6.
English 8. SD/USB OPERATION Accessing an USB 1. Insert an USB device into the USB cable. When connecting an USB device, the unit will read the files automatically. 2. To remove the USB device, you should first select another source or turn off the power, in order to avoid damaging the USB device. Then take off the USB device. 3. T o a c c e s s a n U S B d e v i c e a l r e a d y connected to the unit, long press [ MENU ALL ] button to enter main source menu, then select [USB] to enter USB mode.
This system can play audio files (MP3/WMA) stored in an SD card or USB memory. You can use it as an audio device by simply copying desired audio files into it. Notes: • T his system will not operate or may operate improperly with some card or USB. • Files protected with any DRM cannot be played. Select SD/USB Audio mode Touch top left corner of the screen until SD Audio or USB Audio appears. English SD/USB Audio Operation Operation about SD/USB audio is same as MP3/WMA playback mode.
English 9. BLUETOOTH OPERATION The Bluetooth allows you to utilize your car’s built-in audio system for wireless mobile phone or music handsfree communication. Some Bluetooth mobile phones have the audio features, and some portable audio players support Bluetooth feature. This system can play audio data stored in a Bluetooth audio device. The car stereo with Bluetooth will be able to retrieve phonebook contacts, received call, dialled call, missed call, incoming calls, outgoing call and listen to music.
1. 2. 3. 4. 5. Show history categories Backspace Paired device information Number pad Call/Hang up 6. Turn on/off Auto Connect function 7. Turn on/off Auto Answer function 8. Set PIN code 9. Select internal or external microphone 10. Show next page 11. Back to main operation bar English • Dialed/Received/Missed Call History You can search any Dialled/Missed/Received Call History. 1. Touch [ ] button to show following history categories: Dialed, Received, Missed and Contacts.
English Bluetooth Audio Operation Audio Streaming Operation What is audio streaming? Audio streaming is a technique for transferring audio data such that it can be processed as a steady and continuous stream. Users can stream music from their external audio player to their car stereo wirelessly and listen to the tracks through the car’s speakers. Please consult your nearest Clarion dealer for more information on the product of wireless audio streaming transmitter offered.
Select tuner for listening to the radio Long press [ MENU ALL ] button to enter main source menu, then select [Tuner] to enter Tuner mode. If Tuner is not on the current source menu, touch [ - ] buttons on the bottom of the screen, or hold the center of screen and drag left/right to show more icons. English 10. RADIO OPERATION 15. Show next page 16. Back to main operation bar Menu of listening to the radio Touch the bottom half of screen to show operation bar. 17. Show previous page 18.
Auto store English Only stations with sufficient signal strength will be detected and stored in the memory. To star automatic station search, touch following buttons on the operation bar in ] -> [ ] -> [OK] sequence: [ To stop auto store, press other buttons having radio functions. Notes: 1. A fter auto store, the previous stored stations will be overwritten. 2. The unit has 4 bands, such as FM1, FM2, FM3 and AM. FM3 and AM can store by AS function.
Radio Data System Operation This unit has a built-in “Radio Data System” decoder system that supports broadcast stations transmitting “Radio Data System” data. When using the “Radio Data System” function, always set the radio to FM mode. AF function The AF function switches to a different frequency on the same network in order to maintain optimum reception.
English 11. DAB Operation (DAB302E (sold separately) is required) This function is available when DAB302E (sold separately) is connected. Select DAB as playing source 11. 12. 13. 14. Search service by Programme Type Search all service available Show next page Back to main operation bar Long press [ ALL ] button to enter main source menu, then select [DAB] to enter DAB mode.
Preset scan Auto store Only stations with sufficient signal strength will be detected and stored in the memory. To start automatic station search, touch following buttons on the operation bar in sequence: [ ] -> [ ] -> [Auto Store] -> [OK] . To stop auto store, press other buttons having radio functions. English Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory. ] button on the operation 1. Touch the [ bar. 2.
English 12. iPod & iPhone Operation Connect an iPod or iPhone to the USB connector via CCA-750 cable. When connecting a device, the unit will read the files automatically. The track information display on the screen once playback start. CCA-750 Accessing iPod mode Long press [ MENU ALL ] button to enter main source menu, then select [iPod] to enter iPod mode.
Fast forward/Fast reverse English Fast forward Touch and hold the [ Fast reverse Touch and hold the [ ] button . ] button . Repeat play This function allows you to play the track repeatedly. Touch the [ ] button to select Repeat one or Repeat all. Random play This function allows you to play all tracks in a random order. Touch the [ ] button to perform random play. 1. Play/Pause 2. Repeat play 3. Previous file Fast reverse (long press) 4. Progress bar 5. Next file Fast forward (long press) 6.
English 12. DVB-T Operation Operation menu All channels list Touch the bottom half of screen to show operation bar. Be sure the Search Mode is set to “All Channel”. Touch [ ] button to list all the channels. Select a channel from list Select a channel on the screen to play. Touch the image on the right to play full screen. Add channels to favorite list At “All Channel” menu, touch [ ] button on the bottom left of the screen to edit channels list. 1. 2. 3. 4. 5. 6.
Direct search English To access search menu, touch following buttons: [ ] -> [ ] . I nput numbers by touching digit buttons, then touch [Search] to begin searching. To delete numbers, touch [ ] button.
English 13. Navigation Operation Access navigation mode 1. P ress [OPEN] button to slide down the panel. Insert a MicroSD card into the mini card slot located on the bottom of the panel. 2. To remove the card, you should first select another source or turn off the power, in order to avoid damaging the card. Press to pop it out, then take off the card. Close the panel. 3. P ress [MAP] button on panel to visit Navigation mode.
English 15. TROUBLE SHOOTING GENERAL Problem Unit can not power on. Cause Replace with new fuse of correct rating. Car battery fuse blown. Replace with new fuse of correct rating. ACC power is turn off Turn on the ACC Turn off the power and press the [RESET] button with a thin rod. Unit can not power on. Nothing happens The microprocessor has when buttons are malfunctioned due to noise, etc. pressed. Note: When the [RESET] button is pressed, turn off the power.
DISC Player English Problem Disc cannot be loaded. Sound skips or is noisy. Cause Measure Another disc is already loaded. Eject the disc before loading the new one. There is an object installed inside the unit. Remove the object inside the unit. Disc is dirty. Clean the compact disc with a soft cloth. Disc is heavily scratched or warped. Replace with a compact disc with no scratches.
Bluetooth Cannot pair the Bluetooth enabled device with the car audio system. The audio quality is poor after connection with a Bluetooth-enabled device. Cause English Problem Measure The device does not support the Use another device to connect. profiles required for the system. The Bluetooth function of the Refer to the user manual of the device for how device is not enabled. to enable the function. The internal microphone gain is Adjust the gain of the internal microphone in not set correctly.
Frequency range: 87.5-108.0MHz Usable sensitivity: 13dBf Frequency response: 30Hz-15kHz Stereo separation: 30dB(1kHz) Signal/noise ratio: >55dB AM Tuner Frequency range: 531-1602kHz Usable sensitivity (S/N=20dB): 30dBμ Disc Player System: Disc digital audio system Frequency response: 20Hz-20kHz Signal/noise ratio: >95dB Total harmonic distortion: Less than 0.1% (1kHz) Channel separation: >60dB Video signal output: NTSC Video output level: 1±0.
NX702E English 18. Wiring and Connections GPS Antenna (Black) (Black) (Black) (Black) Black (Black) External Microphone Connection DVB-T DVB-T Antenna Antenna (Black) (Black) DVB-T DVB-T Antenna Antenna (Black) (Black) (Black) Radio Antenna C B Refer to next page.
B English 18 16 14 12 10 8 6 4 2 1 3 5 7 Rear left -/HIGH-LRear left +/HIGH-L+ Front left -/MID-LFront left +/MID-L+ Front right +/MID-R+ 2 4 6 8 Front right -/MID-RRear right +/HIGH-R+ Rear right -/HIGH-RFuse 15A Battery + C A 17 15 13 11 9 7 5 3 1 Location 1 3 5 7 Reverse Parking ACC + AUTO ANT AMP Remote 2 4 6 8 Illumination Phone Mute Groundd Function Connector A Connector B Rear right (+)/HIGH-R(+) / Purple Rear right (-)/HIGH-R(-) / Purple with black stripe Front right (+)/MID-R(+) /
Clarion Co., Ltd. All Rights Reserved. Copyright © 2014: Clarion Co., Ltd.
Owner's manual NX702E Navigation
Thank you for choosing the Clarion NX702E as your navigator. Start using Clarion NX702E right away. This document is the detailed description of the navigation software. You can easily discover Clarion Mobile Map while you are using it; however, we still recommend that you read this manual to fully understand the features and functions. Easy navigation map updates It is easy to keep the navigation system up to date.
Table of contents 1 Warnings and Safety information .........................................................................6 2 Getting started .........................................................................................................7 2.1 Buttons and other controls on the screen ....................................................................... 8 2.1.1 Using keyboards .................................................................................................................. 9 2.
3.1.5 Selecting your Home location ............................................................................................ 50 3.1.6 Selecting a recent destination from the History ................................................................. 51 3.1.7 Entering the Coordinate of the destination ........................................................................ 52 3.1.8 Navigate to a location stored in a photo ............................................................................. 53 3.1.
5.3.4 Route settings..................................................................................................................... 81 5.3.5 User profiles....................................................................................................................... 85 5.3.6 Map settings ....................................................................................................................... 85 5.3.7 Visual guidance settings ........................................................
1. Warnings and Safety information The navigation system helps you find your way to your destination with a connected GPS receiver. Clarion Mobile Map does not transmit your GPS position; others cannot track you. It is important that you look at the display only when it is safe to do so. If you are the driver of the vehicle, we recommend that you operate Clarion Mobile Map before you start your journey. Plan the route before your departure and stop if you need to change the route.
2. Getting started Clarion Mobile Map is optimised for in-car use. You can use it easily by tapping the screen buttons and the map with your fingertips. When using the navigation software for the first time, an initial setup process starts automatically. Do as follows: 1. Select the written language of the application interface. Later you can change it in Regional settings (page 88). 2. Read the End User Licence Agreement. Tap 3. The Configuration wizard starts. Tap 4.
6. If needed, modify the default route planning options. Later you can change them in Route settings (page 81). 7. The initial setup is now complete. The Configuration wizard can be restarted later from the Settings menu (page 78). After the initial setup, the Map screen appears and you can start using Clarion Mobile Map. 2.1 Buttons and other controls on the screen When you are using Clarion Mobile Map, you usually tap buttons on the touch screen.
Radio button When there are only a few Tap one of the buttons to choices, radio buttons may select a new value. be used instead of lists. Only one value can be selected. Switch When there are only two Tap it to turn the switch choices, a checkmark on or off. shows whether the feature is enabled. Slider When a feature can be set to different values in a range, Clarion Mobile Map shows an indicator on a gauge that displays and sets the value. • Drag the handle to move the slider to its new position.
Entering upper and lower case letters When entering a text, the first character appears in upper case to enter an while the rest of the text is in lower case. Tap upper case letter or tap twice to turn on Caps Lock. Tap again and lower case letters return. Entering numbers and symbols Tap to switch to a keyboard offering numeric and symbol characters. Finalising the keyboard entry (accepting the suggested search result) Tap Finalising the keyboard entry (opening the list of search results) . Tap .
Gestures (drag&drop) You need to drag and drop the screen only in cases like: • Moving the handle on a slider. • Scrolling the list: grab the list anywhere and slide your finger up or down. Depending on the speed of the sliding, the list will scroll fast or slow, only a bit or till the end. • Moving the map in map browsing mode: grab the map, and move it in the desired direction. 2.2 Map screen 2.2.1 Navigating on the map A small live map is displayed on the Navigation Menu, as a part of the button.
When GPS position is available, the Vehimarker is displayed in full colour, now showing your current position. There are screen buttons and data fields on the screen to help you navigate. During navigation, the screen shows route information. By default, only one data field is displayed in the bottom right corner. Tap this field to see all route data fields. Tap any of the data fields to suppress others and display only the selected one.
Shows the estimated arrival time at the final destination of the route based on information available for the remaining segments of the route. If Clarion NX702E is capable of receiving live traffic information, the calculation takes into account traffic delays affecting your route if they are received. However, this calculation is rarely accurate. 2.2.2 Position markers 2.2.2.
2.2.3.2 Turn preview and Next street When navigating a route, the top section of the Map screen shows information about the next route event (manoeuvre) and the next street or the next city/town. There is a field in the top left corner that displays the next manoeuvre. Both the type of the event (turn, roundabout, exiting motorway, etc.) and its distance from the current position are displayed. A smaller icon shows the type of the second next manoeuvre if it is near the first one.
Enter motorway. Exit motorway. Board ferry. Leave ferry. Approaching a waypoint. Approaching the destination. 2.2.3.3 Lane information and Signposts When navigating on multi-lane roads, it is important to take the appropriate lane in order to follow the recommended route. If lane information is available in the map data, Clarion Mobile Map displays the lanes and their directions using small arrows at the bottom of the map. Highlighted arrows represent the lanes you need to take.
2.2.3.4 Junction view If you are approaching a motorway exit or a complex intersection and the needed information exists, the map is replaced with a 3D view of the junction. The lanes you need to take are displayed with arrows. Signposts can also be present if information is available. If you want to hide the currently displayed junction, tap the picture and the Map screen returns. 2.2.3.5 Motorway exit services You may need a petrol station or a restaurant during your journey.
2.2.3.6 3D object types Clarion Mobile Map supports the following 3D object types: Type Description 3D terrain 3D terrain map data shows changes in terrain, elevations or depressions in the land when you view the map in 2D, and use it to plot the route map in 3D when you navigate. Hills and mountains are shown in the background of the 3D map, and illustrated by colour and shading on the 2D map.
2.2.3.8 Traffic events Road segments affected by traffic events are displayed with an alternate colour on the map, and small symbols above the road show the nature of the event: Tap to open the Traffic Summary screen.
2.2.4 Manipulating the map Tap the map anywhere to browse it during navigation. The map stops following the current position (the Vehimarker, a red arrow by default, is not locked in a fix position on the screen any more) and control buttons appear to help you modify the map view. Action Moving the map with drag&drop Button(s) No buttons Zooming in and out , Description You can move the map in any direction: tap and hold the map, and move your finger towards the direction you want to move the map.
Compass in 2D map view mode , The direction of the compass shows North. Tap the button to switch to North-up view, and then tap again to rotate the map in the previous direction. , The direction of the compass shows North. Tap the button to switch to North-up view, and then tap again to rotate the map in the previous direction. Compass in 3D map view mode Location information Tap this button to open a new screen with information about the selected map point, the Cursor.
There are more functions available than the number of buttons in the menu. In Settings, you can choose the function of each button (page 81). The following options are available: Button Description Shortcut for This function lets you search for a Place along your route Find / Find Places / Quick Search (page or around your current location if there is no route 37) calculated. This button opens the list of your Favourite destinations. Find / Favourite (page 49) This button opens the History list.
This button opens the Traffic Summary screen. Tap the Traffic icon in the Navigation Menu or on the Map screen This button lets you bypass parts of the recommended My Route / Avoidances route. This button opens the Trip Monitor screen where you can More / Trip Monitor (page 77) manage your previously saved trip logs and track logs. This button opens the list of manoeuvres (the itinerary). Tap the top of the Map screen during navigation.
2.2.6 Checking the details of the current position (Where Am I?) This screen contains information about the current position (or about the last known position if GPS reception is not available) and a button to search for useful Places nearby. . You can access this screen from the map in one of the following ways: • If the current street is displayed below the Vehimarker (the current position on the map), tap it to open the Where Am I? screen. • Open the Quick menu and tap the button.
You can also search for assistance near your current position. Tap open a new screen for the Quick search: to The following services can be searched around the current position or the last known position: • : Car repair and roadside assistance services • : Police stations • : Medical and emergency services • : Petrol stations Tap any of the buttons, select a Place from the list, and navigate to it. 2.3 Navigation Menu You can reach all parts of Clarion Mobile Map from the Navigation Menu.
• to customise the way the navigation software works, to Tap simulate demo routes or to run some additional applications. • to start navigating on the map. The button itself is a miniature Tap live map that shows your current position, the recommended route and the surrounding map area. Tap the button to enlarge the map to the full screen. • Tap to open the Traffic Summary screen.
3 On-road navigation When first started, Clarion Mobile Map calculates routes using the road network of the high quality vector maps provided with the product. You can set up your route in different ways: • If you need a route for immediate navigation, you can select the destination and start navigating to it right away (normal navigation).
3.1.1.1 Entering an address To enter an address as the destination, do as follows: to return to the Navigation Menu. 1. If you are on the Map screen, tap 2. In the Navigation Menu, tap the following buttons: 3. By default, Clarion Mobile Map proposes the country and city/town where you are. If , . , enter the first few letters of the country name on the needed, tap keyboard, and select one country from the list of results. 4. If needed, select a new city/town: . a. Tap b.
5. Enter the street name: . a. Tap b. Start entering the street name on the keyboard. c. Find the street you need: • The most likely street name is always shown in the input field. To accept . it, tap • If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of ). Select results before it appears automatically, tap the street from the list. 6. 7. Enter the house number: . a. Tap b.
8. After a short summary of the route parameters, the map appears showing the entire to modify route route. The route is automatically calculated. Tap and start your journey. parameters, or tap If you know that you will use this destination frequently, before tapping to confirm the destination, put it on the list of your Tip! then Favourites first: tap , give a to save the location. name for the new Favourite, and tap The map with the destination returns automatically.
• If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of ). Select results before it appears automatically, tap the street from the list. . The midpoint of the 5. Instead of entering the house number, tap street is selected as the destination. 6. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( new location.
3.1.1.3 Selecting an intersection as the destination To enter an address as the destination, do as follows: to return to the Navigation Menu. 1. If you are on the Map screen, tap 2. In the Navigation Menu, tap the following buttons: 3. If necessary, modify the country and city/town as described earlier (page 27). 4. Enter the street name: Tap b. Start entering the street name on the keyboard. c. Find the street you need: The most likely street name is always shown in the input field.
6. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( ) appears at the to confirm the destination, or tap new location. Tap to select a different destination. 7. After a short summary of the route parameters, the map appears showing the entire to modify route route. The route is automatically calculated. Tap and start your journey. parameters, or tap 3.1.1.
• If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of ). Select results before it appears automatically, tap the city/town from the list. 5. . This way the centre of Instead of entering the street name, tap the displayed city/town becomes the destination of the route. 6. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination.
3.1.1.5 Entering an address with a postal code All of the above address searching possibilities can be performed with entering the postal code instead of the city/town name. Find below an example with a full address: to return to the Navigation Menu. 1. If you are on the Map screen, tap 2. In the Navigation Menu, tap the following buttons: 3. If necessary, modify the country as described earlier (page 27). 4. Enter a new city/town using its postal code: a. Tap . b.
• If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of ). Select results before it appears automatically, tap the street from the list. 6. 7. Enter the house number: . a. Tap b. Enter the house number on the keyboard. (To enter letters, tap c. to finish entering the address. (If the entered house Tap number cannot be found, the midpoint of the street is selected as the destination.) ).
8. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap to modify route and start your journey. parameters, or tap 3.1.1.6 Tips on entering addresses quickly • When you are entering the name of a city/town or a street: • Only those letters are offered on the keyboard that appear in possible search results. All other characters are greyed out.
• you can search for a Place by its name In addition, you can search for special services from the 'Where Am I?' screen. 3.1.2.1 Quick search for a Place of Interest The Quick search feature lets you quickly find a Place by its name. The search is always carried out • along the recommended route if it exists or • around your current location if there is no destination given. 1.
7. If necessary, tap the map somewhere else to modify the destination. The Cursor ) appears at the new location. Tap ( to select a different destination. destination, or tap 8. to confirm the After a short summary of the route parameters, the map appears showing the entire to modify route route. The route is automatically calculated. Tap and start your journey. parameters, or tap 3.1.2.
• If there is no active route (destination is not selected), they are searched around the current position. • If the current position is not available either (no GPS signal), they are searched around the last known position. • : • If an active route exists, restaurants are searched along the route. • If there is no active route (destination is not selected), they are searched around the current position.
9. After a short summary of the route parameters, the map appears showing the entire to modify route route. The route is automatically calculated. Tap parameters, or tap and start your journey. 3.1.2.3 Searching for a Place of Interest by category You can search for Places of Interest by their categories and subcategories. to return to the Navigation Menu. 1. If you are on the Map screen, tap 2. In the Navigation Menu, tap the following buttons: 3. Tap 4.
• to search along the active route, and not around a Tap given point. This is useful when you search for a later stopover that results in a minimal detour only, such as searching for upcoming petrol stations or restaurants. (The result list will be ordered by the length of the necessary detour.) , select the city/town to search in. 5. (optional) If you have selected 6. Select one of the main Place categories (e.g.
8. Sometimes the list of brands in the selected Place subcategory appears. Select one to list all Places in the selected subcategory around brand or tap the selected location or along the route. 9. Finally, the results appear in a list. 10. (optional) The Places in the list are ordered by their distance from the current or last known position, from the selected city/town, from the destination or by the length of the . necessary detour. If you need to reorder the list, tap 11.
3.1.2.4 Searching for a Place of Interest by name You can search for Places of Interest by their names. You can search around different locations or along your route in the whole Place database or in one Place category or subcategory only. to return to the Navigation Menu. 1. If you are on the Map screen, tap 2. In the Navigation Menu, tap the following buttons: 3. Tap 4. Select the area around which the Place should be searched for: 5. , . .
6. Select one of the main Place categories (e.g. Accommodation) to search in or tap to search among all Places. 7. Select one of the Place subcategories (e.g. Hotel or Motel) to search in or tap to search in the selected Place category. if you have not done it before. 8. Tap 9. Using the keyboard, start entering the name of the Place. to open the list of Places with 10. After entering a few letters, tap names containing the entered character sequence.
11. (optional) The Places in the list are ordered by their distance from the current or last known position, from the selected city/town, from the destination or by the length of the . necessary detour. If you need to reorder the list, tap 12. Browse the list if necessary and tap one of the list items. A full screen map appears with the selected point in the middle. The name and address of the Place is displayed at the top of the screen. to see the details of the selected Place. Tap 13.
5. The list of Places with the entered sequence in their phone number appears. 6. (optional) The Places in the list are ordered by their distance from the current or last known position, from the selected city/town, from the destination or by the length of the . necessary detour. If you need to reorder the list, tap 7. Browse the list if necessary and tap one of the list items. A full screen map appears with the selected point in the middle.
3.1.2.6 Selecting nearby assistance from 'Where Am I?' You can quickly search for nearby assistance from the 'Where Am I?' screen. to open the Quick menu. 1. On the Map screen, tap 2. Tap 3. Preset search categories appear, all for searching around the current position (or around the last known position if the current position is not available): , and then . • : Car repair and roadside assistance services • : Medical and emergency services • : Police stations • : Petrol stations 4.
6. Browse the list if necessary and tap one of the list items. A full screen map appears with the selected point in the middle. The name and address of the Place is displayed at the top of the screen. 7. to see the details of the selected Place. Tap (optional) Tap to return to the map. 8. If necessary, tap the map somewhere else to modify the destination. The Cursor ( ) appears at the new location. Tap to select a different destination. destination, or tap 9.
6. After a short summary of the route parameters, the map appears showing the entire to modify route route. The route is automatically calculated. Tap and start your journey. parameters, or tap 3.1.4 Selecting the destination from your Favourites You can select a location that you have already saved as a Favourite to be your destination. Adding a location to the list of Favourite destinations is described on page 64. 1.
5. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap to modify route and start your journey. parameters, or tap 3.1.5 Selecting your Home location To navigate to your Home location, first you need to save it. Seach for your address or and browse the map and when the Cursor is at the desired location, tap . select Now that the Home location is set, you can quickly navigate to it: 1.
3. After a short summary of the route parameters, the map appears showing the entire to modify route route. The route is automatically calculated. Tap and start your journey. parameters, or tap 3.1.6 Selecting a recent destination from the History The destinations that you have set earlier appear in the History. 1. Access the History: • If you are on the Map screen, tap • If you are in the Navigation Menu, tap and then tap . and then tap . 2. The list of recent destinations appears.
5. After a short summary of the route parameters, the map appears showing the entire to modify route route. The route is automatically calculated. Tap parameters, or tap and start your journey. 3.1.7 Entering the Coordinate of the destination You can also select a destination by entering its coordinate. Do as follows: to return to the Navigation Menu. 1. If you are on the Map screen, tap 2. In the Navigation Menu, tap 3. Tap 4.
7. A full screen map appears with the selected point in the middle. If necessary, tap the ) appears at the map somewhere else to modify the destination. The Cursor ( to confirm the destination, or tap new location. Tap to select a different destination. 8. After a short summary of the route parameters, the map appears showing the entire to modify route route. The route is automatically calculated. Tap and start your journey. parameters, or tap 3.1.
6. After a short summary of the route parameters, the map appears showing the entire to modify route route. The route is automatically calculated. Tap and start your journey. parameters, or tap Note! Only geotagged JPG files contain location information. That is why these kind of files can only be used in navigation. Other picture files do not appear in the list. Files must be located on an inserted SD card or USB pendrive, either in the root folder or in a "pictures" folder. 3.1.
6. The Destination menu appears and you can select the destination of the route the same way as described in the previous sections. 7. When the new destination is selected, the list returns. 8. where you want to insert the new route point in To add more destinations, tap the list, and repeat the above procedure. 3.2 Viewing the entire route on the map It is easy to get a map overview of the active route. Do as follows: to return to the Navigation Menu. 1. If you are on the Map screen, tap 2.
to return to the Navigation Menu. 1. If you are on the Map screen, tap 2. In the Navigation Menu, tap 3. The following pieces of information are displayed: 4. . • The name and/or address of the destination. • Warning icons (if any). They provide extra information about your route (e.g. unpaved roads or toll roads to be taken). • The total time of the route. • The total length of the route. • Estimated delay calculated from traffic events on your route.
3.4.1 Selecting a new destination when already having a route: New Route, Waypoint or Final Destination If you already have a recommended route and you select a new destination as described in the above sections, the application will ask you whether to start a new route, add a new waypoint (intermediate destination) to the route or append the newly selected destination at the end of the current route. • to plan a new route to the newly selected location.
and 4. The first line is the start of the route, normally the current GPS position. Tap confirm your action at the warning message. 5. The Destination menu appears and you can select the start point of the route the same way you select a destination. 6. When the new start point is set, tap 7. The map returns with a transparent Vehimarker (showing that there is no GPS reception). If an active route already existed, it is now recalculated starting from the selected location. 8.
3.4.3 Editing the list of destinations (Edit Route) You can edit the route by modifying the list of destinations. You can add or remove destinations, modify the start position or reorder the list. 1. If you are on the Map screen, tap 2. In the Navigation Menu, tap 3. Tap 4. You have the following options: to return to the Navigation Menu. . . • Tap to add a new destination. • Tap to delete a destination. • Tap • to reorder the list.
3.4.5 Cancelling the active route To cancel the navigated route, do one of the following: • If you are on the Map screen, tap with waypoints, you need to tap • and then tap . (If you have a route until all waypoints are deleted.) and then tap In the Navigation Menu, tap The active route is deleted with all its waypoints. .. 3.4.
and scroll down for 5. Or if you cannot find a good alternative, tap routes with different routing methods. 6. Select one of the route alternatives and tap to return to the previous screen. Clarion Mobile Map recalculates the route. The orange line now shows the new recommended route. 3.4.7 Checking route alternatives for an existing route To recalculate the active route with a different route planning method, you can modify the Route settings (page 81).
5. You see the basic details of three route alternatives with the selected route planning method. Tap any of them to see it on the map. 6. Or if you cannot find a good alternative, tap routes with different routing methods. 7. for a few Select one of the route alternatives then tap and hold seconds to return to the Map screen. Clarion Mobile Map recalculates the route. The orange line now shows the new recommended route. and scroll down for 3.4.
• • • 3. Clarion Mobile Map recalculates the route optimised for the new vehicle type. The orange line now shows the new recommended route. 3.4.9 Changing the road types used in route planning To recalculate the active route with different road type preferences, do as follows. These changes can also be made in Settings (page 81). and then tap . 1. On the Map screen, tap 2. Tap any of the listed road types to modify the route. If needed, scroll the list for all road types.
• 3. - If the selected routing method is not Green, you can have your route compared to the best green alternative on the screen when confirming the route. If this alternative is much better than the selected method, you can quickly switch to Green mode to confirm the changes. Clarion Mobile Map recalculates the Tap route. The orange line now shows the new recommended route. 3.5 Saving a location as a Favourite destination You can add any location to Favourites, the list of frequently used destinations.
3.6 Saving a location as an alert point You can save any map location as an alert point (for example a speed camera or a railway crossing). 1. Browse the map and select a location. The red Cursor appears there. 2. Tap 3. Scroll down the list and tap 4. On the newly opened screen, select the type of the alert point, the direction from which you expect the alert, and (if applicable) the speed limit for this alert point. 5. Tap . . to save the location as a new alert point.
3.7 Editing an alert point You can edit a previously saved or uploaded alert point (for example a speed camera or a railway crossing). 1. Browse the map and select the alert point to edit. The red circle appears around the alert point. 2. Tap 3. Scroll down the list and tap 4. On the newly opened screen, modify the type of the alert point, the direction from which you expect the alert, or (if applicable) the speed limit for this alert point. 5. Tap 66 NX702E English . .
3.8 Watching the simulation of the route You can run a simulated navigation that demonstrates the active route. Do as follows: to return to the Navigation Menu. 1. If you are on the Map screen, tap 2. In the Navigation Menu, tap 3. Tap 4. . The simulation starts from the starting Scroll down the list and tap point of the route, and using a realistic speed, it leads you through the whole recommended route. 1.
• 2. : Tap to increase the speed of the simulation to 4, 8 or 16 times faster. Now tap again to return to the normal speed. Tap 68 NX702E English to stop the simulation.
4 Off-road navigation When first started, Clarion Mobile Map calculates routes using the road network of the high quality vector maps provided with the product. You can switch the application to off-road mode in Navigation settings in one of the following ways: • , From the Main menu, tap , and then . • From the Map screen, tap , and then . Most of the procedures described for on-road navigation also apply to off-road navigation.
5 Reference Guide On the following pages you will find the description of the different concepts and menu screens of Clarion Mobile Map. 5.1 Concepts 5.1.1 Smart Zoom Smart Zoom provides much more than just a usual automatic zoom feature: • While following a route: when approaching a turn, it will zoom in and raise the view angle to let you easily recognise your manoeuvre at the next junction.
This feature can be turned off in Settings (page 87). 5.1.4 Route calculation and recalculation Clarion Mobile Map calculates the route based on your preferences: • Route planning methods: • : Gives a quick route if you can travel at or near the speed limit on all roads. Usually the best selection for fast and normal cars. • : Gives a route that has the smallest total distance of all possible routes. It can be practical for slow vehicles.
• Vehicle types: When creating a new vehicle profile, select one of the below vehicle types. Besides the below mentioned conditions, dimension, weight and freight hazard restrictions can also be taken into account when planning a route. • : • Manoeuvre restrictions and directional constraints are taken into account when planning a route. • Roads are used only if access for cars is allowed. • Private roads and resident-only roads are used only if they are inevitable to reach the destination.
• Road types used or avoided in route calculation: • • • • • • Real-time Traffic events are also taken into account and sometimes greatly modify the route. Clarion Mobile Map automatically recalculates the route if you deviate from the proposed itinerary or if a newly received Traffic event concerns a part of the recommended route. For further information about Route settings, see page 81. 5.1.5 Green routing Route calculation is not only about finding the quickest or shortest route.
If the selected route planning method is not Green, and you have allowed the application to show the green alternative, the price, fuel consumption and CO2 emission differences between your selected route and the Green route are also shown on this screen: Tap the field with these details to switch the route to Green immediately. 5.1.
5.1.7 Speed limit warning Maps may contain information about the speed limits of the road segments. Clarion Mobile Map is able to warn you if you exceed the current limit. This information may not be available for your region (ask your local dealer), or may not be fully correct for all roads in the map. The maximum speed set in the vehicle profile is also used for this warning. Clarion Mobile Map alerts you if you exceed the preset value even if the legal speed limit is higher.
Clarion NX702E contains the TMC receiver that is needed to receive Traffic events. If public Traffic data is broadcast at your location, Clarion Mobile Map automatically takes into account the traffic events received. You do not need to set anything in the program. The receiver will automatically search the FM radio stations for TMC data, and the decoded information will immediately be used in route planning.
If there are traffic events on the recommended route that the application has not Note! icon will open the list of significant traffic events to let you bypassed, the quickly check them. 5.2 'More' menu The 'More' menu provides you with various options and additional applications. Tap the following buttons: , Button . Description You can configure the program settings, and modify the behaviour of Clarion Mobile Map.
Run the Demo to watch sample route simulations to see how navigation works. The About section provides you with product information. Read the Software and Database End User License Agreement, or check the map and other contents of the application. You can also access program usage statistics. 5.3 Settings menu You can configure the program settings, and modify the behaviour of Clarion Mobile Map. Tap the following buttons: , The Settings menu has several options. Tap Button , .
Display related settings. These settings allow you to customise the application for your local language, measurement units, time and date settings and formats, as well as to choose the time zone. Trip logs and track logs contain useful information about your trips. Trip logs can be saved manually when you reach your destination or you can turn on the automatic saving here. Modify the basic software parameters set during the initial setup process. For details, see page 7.
Tap this button to set the verbosity of the voice instructions: how much they tell and how often they speak. Maps may contain information about the speed limits of the road segments. Clarion Mobile Map is able to warn you if you exceed the current limit. This information may not be available for your region (ask your local dealer), or may not be fully correct for all roads in the map. The maximum speed set in the vehicle profile is also used for this warning.
5.3.2 Customise Quick menu The content of the Quick menu (page 20) is fully customisable. Tap the button you want to change, and select its new function from the list. The list of available functions and their descriptions are on page 20. 5.3.3 Traffic settings The recommended route is not always the same between two points. Whenever suitable data exists, traffic information can be taken into account in the route calculation.
If the selected routing method is not Green, you can have your route compared to the best green alternative on the screen when confirming the route. If this alternative is much better than the selected method, you can quickly switch to Green mode. To let the route fit your needs, you can also set which road types are to be considered for or to be excluded from the route if possible. Excluding a road type is a preference. It does not necessarily mean total prohibition.
Tap this button to reset all vehicle profiles to their default settings. When creating a new vehicle profile, first you need to select the vehicle type. Then you need to set the following parameters (some of them may not exist for the selected vehicle type). You can modify the same parameters when you edit an existing profile: Button Description Tap this button to rename the profile for something meaningful. Enter the average consumption of your vehicle when used in built-up areas.
• : • Manoeuvre restrictions and directional constraints are taken into account when planning a route. • Roads are used only if access for buses is allowed. • Private roads, resident-only roads and walkways are excluded from routes. • : • Manoeuvre restrictions and directional constraints are taken into account when planning a route. • Roads are used only if access for taxis is allowed. • Private roads, resident-only roads and walkways are excluded from routes.
: a) : Enter the average consumption of your vehicle when used in built-up areas. The unit for consumption can be set in Regional Settings. b) : Enter the average consumption of your vehicle when used on highways. The unit for consumption can be set in Regional Settings. c) : Select the engine and fuel type of your vehicle. This helps in estimating the CO2 emission. d) : Enter the average fuel price for travel cost calculation. The currency can be set in Regional Settings. 5.3.
Button Description Switch the map view between a 3D perspective view and a 2D topdown view. Adjust the basic zoom and tilt levels to your needs. Three levels are available. When selected, the map zooms out to show an overview of the surrounding area if the next route event (manoeuvre) is far. When you get close to the event, the normal map view returns.
5.3.7 Visual guidance settings Adjust how the software helps you navigate with different kinds of route related information on the Map screen. The data fields in the corner of the Map screen can be customised. Tap this button and select the values you want to see. The values can be different when you navigate a route from when you are just cruising without a given destination.
Similar to the above possibility, alternative routes can be suggested when driving on normal roads. Clarion Mobile Map will select a different turn in the upcoming intersection and offers you a different route for the next section of the route. Your options are the similar as above but you cannot modify the offered detour. Parking at the destination may not be easy in city areas. As you approach the destination, Clarion Mobile Map can offer parking category Places near your destination.
By default, time zone is taken from the map information and adjusted by your current location. Here you can set time zone and daylight saving manually. 5.3.10 Trip monitor settings Trip logs contain useful information about your trips. Trip logs can be saved manually when you reach your destination or you can turn on the automatic saving here. You can access these logs in the Trip monitor. Trip monitor is available from the More menu. Trip monitor can record statistical data of your trips.
6 Glossary 2D/3D GPS reception The GPS receiver uses satellite signals to calculate its (your) position and needs at least four signals to give a three-dimensional position, including elevation. Because the satellites are moving and because objects can block the signals, your GPS device might not receive four signals.
North-up map orientation In North-up mode the map is rotated so its top always faces North. This is the orientation for example in Find on Map. Road Safety Camera Special alert points for speed, red light or bus lane cameras. Different data sources are available. You can configure Clarion Mobile Map to warn you when you approach one of these cameras. Detecting the location of Road Safety Cameras is prohibited in certain countries.
7 End User Licence Agreement 1 The contracting parties 1.1 This Agreement has been entered into by and between NNG Software Developing and Commercial Ltd. (registered seat: 23 Bérc utca, H-1016 Budapest, Hungary; company reg.no.: 01-09-891838) as Licensor (hereinafter: Licensor) and You as the end user (hereinafter: User; the User and the Licensor jointly referred to as: Parties) in subject of the use of the products specified in this Agreement, including software products, databases and content .
4.5. Your rights under this Agreement will terminate immediately without notice from Licensor if you materially breach it or take any action in derogation of Licensor's and/or its licensors' rights to the Software Product. Licensor may terminate this Agreement if any Software Product becomes, or in Licensor's reasonable opinion likely to become, the subject of a claim of intellectual property infringement or trade secret misappropriation.
7.1.6 to modify, extend, transform the Software Product (in whole or in part), to separate it into parts, combine it with other products, install it in other products, utilize it in other products, not even for the purpose of achieving interoperability with other devices; 7.1.
8.6 The Licensor also draws the attention of the User to the fact that, when using the Software Product in any form of vehicle, observing the traffic regulations and rules (e.g. use of obligatory and/or reasonable and suitable security measures, proper and generally expected care and attention in the given situation, and special care and attention required due to the use of the Software Product) is the exclusive responsibility of the User.
10.1 The User hereby acknowledges that the Software Product may collect, transmit to Licensor or third parties, and in some cases store data connected to the usage of the Software Product by the User (e.g. movement/route data, user interaction data). Such data collection functions may be disabled or enabled by User any time from within the corresponding menu. The collected data is always anonymous, not associated in any way with any personal information of the User or with the User itself. 10.
11.7 Discontinuation. Licensor reserves the right to discontinue provision or access to any Online Content Service with or without prior notice to the User. Such discontinuation shall not entail any consequences other than here stated. In case of discontinued Online Content Services that were (i) provided for a pre-paid fee, AND (ii) such fee covers the use of the Online Content Service for a definite term (i.e.
8 Copyright note The product and the information contained herein are subject to change without prior notification. This manual may not, in whole or in part, be reproduced or transmitted in any form either electronically or mechanically, including photocopying and recording, without the express written consent of Clarion. © 2014 - Clarion Data Source © 2006-2014 Tele Atlas. All rights reserved.
