User's Manual

9
English
NX702
Names of Buttons
[MAP PWR] Knob
• Press to power on the system when
ignition on.
• Whenpoweron,pressto enternavigation
mode.
• Press and hold this key more than 1
second to turn off the system.
[ MENU ALL ] Button
• Shortpresstoshow/exitshortcutmenu.
• Long press to show/exit main source
menu.
[-,+]buttons
• Presstodecreaseorincreasethevolume.
[ MIC ] Hole
• Internalmicrophone
The way of SENSOR control ( /+/-)
MUTE
VOL UP (1 degree)
VOL DOWN (1 degree)
MENU (long press)
Speaker Setting Mode
Whenpoweronrsttime,“SpeakerSettingMode”dialogappears.
1. Select “Initial settings”, all speaker settings return to default setting.
3 Memory of previous speaker mode are deleted.
Touch [OK] on the dialog box, then select a mode.
2. Select “Load settings”, currennt speaker settings are kept.
3. Speaker Setting Mode
 Normalmode:FrontL,R;RearL,R;SubwooferL,R
 3Waymultimode:MIDL,R;HIGHL,R;SubwooferL,R
 2Waymultimode:MIDL,R;HIGHL,R;REARL,R
[RESET] Button
• Presstoloadoriginalsettings.
Note: When the [RESET] button is pressed,
frequencies of radio stations, titles, etc.
stored in memory are cleared.
[ OPEN/vR ] Button
• Short pressto slide downand close the
panel.
• Long press to VR(Voice Recognition)
function.
[
] EJECT Button
• Presstoejectdisc.