Owner's Manual

30 NX605
English
MEMO:
s7HENTHEREGISTRATIONINFORMATIONOF
ACELLPHONEISDELETEDTHEINCOMING
OUTGOINGCALLLOGANDPHONEBOOK
INFORMATIONOFTHECORRESPONDING
CELLPHONEALSOAREDELETED
s)FTHEUNITISTURNEDOFFWHILEDELETING
INFORMATIONREGISTEREDFORA"LUETOOTH
COMPATIBLEDEVICETHEINFORMATION
SOMETIMESCANNOTBEDELETED)FTHIS
HAPPENSTURNTHEUNITONANDTRYDELETING
THEINFORMATIONAGAIN
Using cellphones
Attention
s$ONOTLEAVECELLPHONESINSIDETHEVEHICLE
4HEINSIDEOFTHEVEHICLEGETSHOTUNDER
THEBLAZINGSUNFOREXAMPLEANDMIGHT
CAUSETHEMTOMALFUNCTION
Screen during a telephone call
The following screen is displayed during a
telephone call:
Screen during a telephone call
:
This displays the option screen.
:
This mutes the phone outgoing volume.
:
This switches to telephone calls on the
cellphone unit.
Private call operation is sometimes not
switched to depending on the cellphone
you are using.
:
This ends the telephone call.
:
When the number entry screen is
displayed, enter the numbers for the
password, etc. during the telephone call.
Touching
returns the screen to the
previous screen.
s&ORDETAILSONHOWTOREGISTER"LUETOOTH
COMPATIBLEDEVICESTOCELLPHONESREFERTO
THE5SERS-ANUALFORTHECELLPHONE
s4HENAMEOFTHEDEVICEANDTHE0).CAN
BECHANGED
s#ONNECTIONSSOMETIMESARENOT
MADEAUTOMATICALLYIFTHE"LUETOOTH
COMPATIBLEDEVICEISNOTSETASh7AITING
FORCONNECTIONvORTHEDEVICEISNOTIN
ASTANDBYSTATE&ORDETAILSREFERTOTHE
5SERS-ANUALFORTHEDEVICE
s2ECONNECTIONISAUTOMATICALLYRETRIEDIF
THECONNECTIONISBROKENSUCHASIFTHE
"LUETOOTHCOMPATIBLEDEVICEISTOOFAR
AWAY
s0ROBLEMSONSOME"LUETOOTHCOMPATIBLE
DEVICESMAYCAUSECOMMUNICATION
ERRORSORPREVENTOPERATIONSFROMBEING
PERFORMEDORDISPLAYEDPROPERLY)FTHIS
HAPPENSSWITCHTHE"LUETOOTHFUNCTIONS
OFFTHENBACKONAGAIN$EFAULT/FF
s7HENSWITCHINGTHE"LUETOOTHFUNCTIONS
ONTHE"LUETOOTHCOMPATIBLEDEVICEOFF
THENBACKONAGAINDOTHESAMEFORTHE
"LUETOOTHFUNCTIONSONTHEUNIT
s7HEN"LUETOOTHFUNCTIONSARETURNEDOFF
"LUETOOTHFUNCTIONSONTHEUNITCANNOT
BEOPERATED!LSOCONNECTIONTOAND
OPERATIONSOFTHEUNITFROM"LUETOOTH
COMPATIBLEDEVICESARENOLONGERPOSSIBLE
Switching the connected
Bluetooth-compatible device
When two or more Bluetooth-compatible
devices are registered to the unit, the device
to be connected can be switched.
Notice
s4HOUGHUPTOFIVE"LUETOOTHCOMPATIBLE
DEVICESCANBEPAIREDONLYONECANBE
CONNECTEDTOATANYONETIME
1
MENU
2
Set
at [BT Devices Connection]
3
Confirm that [Connect with
Bluetooth
] is turned “ON”.
4
Select
for the device to be
switched.
5
Select the Bluetooth connection
mode.
MEMO:
s3WITCHINGTHE"LUETOOTHCOMPATIBLE
DEVICETHATISCURRENTLYINUSEALSO
SWITCHESTHEDEVICEINFORMATIONSUCH
ASINCOMINGOUTGOINGCALLLOGSTOTHE
SELECTEDDEVICE
s7HENA"LUETOOTHCOMPATIBLEDEVICEIS
RESTARTEDITMAYNOTCONNECTAUTOMATICALLY
DEPENDINGONTHETYPEOFDEVICE5SETHIS
PROCEDURETOCONNECTTHESELECTEDDEVICE
IFITISNOTDONEAUTOMATICALLY
Deleting registered Bluetooth-
compatible devices
You can delete the information of paired
Bluetooth-compatible devices.
1
MENU
2
Set
at [BT Devices Connection]
3
for the device you want
to delete.
4
OK