Owner's Manual

NX605 9
English
Inserting and removing the
microSD card
To enjoy the data in microSD cards, the
microSD card must be loaded into the unit.
Attention
s)NSERTANDREMOVETHEMICRO3$CARDAFTER
TURNINGOFFTHEUNITBECAUSETHEMICRO3$
CARDMIGHTGETDAMAGE
s4HEMAPMICRO3$CARDISALREADYINSERTED
INTOTHEMICRO3$CARDLOADINGSLOTUNDER
THESLOTCOVER
)FTHEMAPMICRO3$CARDISREMOVEDTHE
UNITDOESNOTFUNCTION$ONOTREMOVEOR
INSERTTHEMAPMICRO3$CARDEXCEPTTO
UPDATEMAPINFORMATION
s$ONOTTOUCHTHETERMINALSURFACEOF
MICRO3$CARDS
❏
How to insert the microSD card
1
Insert the microSD card into the
loading slot with its label surface
face up.
Firmly insert the microSD card as far
as it can go.
❏
How to remove the microSD
card
1
Grip the microSD card with your
fingers and pull it out.
To remove the microSD card, grip it
with your fingers and pull it out.
Adjusting the audio volume
1
Turn the rotary volume knob.
Switching the display screen
The audio screen and map screen are
switched by the following operation.
❏
Switching to the audio screen
1
In the map screen
NAVI AV
The audio screen of the selected
source is displayed.
❏
Switching to the map screen
1
In the audio screen
NAVI AV
The map screen is displayed.
2
Select the relevant item from the
list.
If all indexes are not displayed, either
touch
or or flick to move to
the next page.
❏
Adjusting numerical values
When and are displayed, numerical
values, volume, etc. can be adjusted.
Inserting and removing discs
To enjoy data in CD, MP3/WMA or DVD
discs, the disc must be loaded into the unit.
Attention
s$ONOTLEAVEDISCSPROTRUDINGFROMTHE
LOADINGSLOT%ITHERINSERTTHEMCOMPLETELY
ORREMOVETHEM
s$ONOTTOUCHTHERECORDINGSURFACESHINY
SIDEOFTHEDISC
s$ONOTINSERTTWODISCSATTHESAMETIME
❏
How to insert discs
1
Insert the disc into the loading
slot with its label surface face
up.
The disc is drawn in. After a while, the
disc starts playing.
When the disc is inserted a short way,
it is automatically drawn in. If the disc
is not drawn in, this means that a disc
is already loaded.
Do not exert unnecessary force when
inserting discs. First remove the disc
that is already loaded, and then load
the new disc.
❏
How to remove discs
1
The disc is ejected.
2
Remove the disc.
MEMO:
s)FADISCISNOTREMOVEDIMMEDIATELYAFTER
AWHILEITISAUTOMATICALLYDRAWNINAGAIN