Owner's Manual

Connecting the parking brake lead
Connect the
lead
to parking brake lamp
ground
in
the meter
panel.
•
Connecting the parking brake
lead to lamp
ground
allows you to watch video images
when the parking brake
is
engaged.
e
When the parking brake
lead
is
not connected, the monitor
will
not
display
video images.
e
If
"Audio Only"
appears
on
the screen just after turning
on
the ACC power of the
car,
release
the parking brake
while
confirming safety, and then engage the parking brake
again.
Parking brake
lamp
Electro-tap
(sold
separately)
EB
lead
to
battery
Parking brake
signal lead
Parking brake
lead
(Grass-Green)
0 Connecting the Accessories
e
How to attach the
electro-tap
1.Piace
the
Parking brake lead
at the
stopper
,
and fold
it
back
in
the direction
of
the arrow.
2.Pass
the
Parking brake
signal lead through,
and
fold
it back
in
the direction
of
the arrow.
Parking brake
signal lead
/ Parking
brake
~
r
~~gna}l,
Stopper
Parking brake
lead
(Grass-Green)
Connection
to
the Rear
Vision
Camera for vehicle
The Rear Vision Camera for vehicle
can be connected
to
optional
Rear Vision Camera input
cable
(CCA-644) with RCA pin
cable.
For
detailed
information, refer to the instruction sheet
or manual for the Rear Vision Camera.
e
Be sure to connect the reverse gear lead
to the
vehicle's relevant terminal.
e
Connect the Rear Vision Camera to the RCA pin
cable;
if not, the screen turns
black
while
the gearshift
lever
is
in
the reverse gear position.
SiriusXM-Connect Vehicle Tuner
Connect this tuner to SiriusXM-Connect
Vehicle
Tuner terminal.
For more information
on
how to
install
the SiriusXM Connect
Vehicle
tuner,
consult the
installation
guide
included with the tuner.
NX605 17