Owner's Manual

0
Installing
the
Main
Unit
in a
NISSAN
Vehicle
Finisher
*1
Mounting bracket
(1
pair for the
left
and right sides)
Figure 3
*1
Position
the face
panel
with its wide edge at the bottom. Fit the edge into the groove
of
the main
unit.
0
Installing
the
Main
Unit
in
a
TOYOTA
Vehicle
Center
Panel
*2
Figure 4
*2
Some panel
openings are too
small
for the unit depending on the
vehicle
type and
model.
In
such a case, trim the upper and
lower
sides of the
panel
frame by about 0.5
to 1.5 mm so the
unit can be inserted
smoothly.
*3
If
a hook on the installation
bracket interferes with the unit, bend and
flatten
it with a nipper or
similar tool.
Typical
Mounting
Brackets
Example
1
Example
2
Example 3
Affix the screws to the
•
marks.
NX605 13