Owner's Manual
Table Of Contents
- Quick Start Guide / Installation Manual
- Owners Manual (Supplied on CD-ROM)
- Initialize
- Using This Manual - Hard Buttons and Touch Keys
- Table of Contents
- Features
- Parts & Controls
- Basic Operation
- Listening to the Radio
- SiriusXM Operation
- Viewing DVDs
- CD / MP3 / WMA Playback
- Viewing DivX Content
- Listening to MicroSD / USB Memory Files
- iPod / iPhone Operation
- Bluetooth Operation
- AUX Input
- Pandora Operation
- Registering a Bluetooth Device
- Using Cellphones
- Using Smart Access
- Using an Optional Remote Control
- Using an Optional Rear Camera
- Using an Optional Rear Seat Monitor
- Menu Settings
- Troubleshooting
- Specs
- Installation and Connections
- Index
- Navigation Owners Manual (Supplied on CD-ROM)
- Addendum Sheet - About the Audio Pause Function
- Corrections to Supplied Documentation
- Scan of CD-ROM
- Warranty
NX603/FX503 55
English
Installing the Main Unit in a NISSAN Vehicle
Figure 3
Mounting bracket
(1 pair for the left and right sides)
6-Spacer (thickness: 1 mm)
6-Flat head screw
(M5 x 8)
(attached to the main unit)
Main Unit
Finisher
✽
1
✽
1 Position the face panel with its wide edge at the bottom. Fit the edge into the groove of the main
unit.
Installing the Main Unit in a TOYOTA Vehicle
Install by using parts attached to the vehicle. (Screws marked are attached to the vehicle.)
Figure 4
✽
3
Mounting bracket
(1 pair for the left
and right sides)
8-Hexagonal screw
(M5 x 8)
Main Unit
Center Panel
✽
2
✽
2 Some panel openings are too small for the unit depending on the vehicle type and model. In
such a case, trim the upper and lower sides of the panel frame by about 0.5 to 1.5 mm so the
unit can be inserted smoothly.
✽
3 If a hook on the installation bracket interferes with the unit, bend and flatten it with a nipper or
similar tool.
■
Typical Mounting Brackets
Example 1 Example 2 Example 3
Affix the screws to the
marks.