Owner's Manual
Table Of Contents
- Quick Start Guide / Installation Manual
- Owners Manual (Supplied on CD-ROM)
- Initialize
- Using This Manual - Hard Buttons and Touch Keys
- Table of Contents
- Features
- Parts & Controls
- Basic Operation
- Listening to the Radio
- SiriusXM Operation
- Viewing DVDs
- CD / MP3 / WMA Playback
- Viewing DivX Content
- Listening to MicroSD / USB Memory Files
- iPod / iPhone Operation
- Bluetooth Operation
- AUX Input
- Pandora Operation
- Registering a Bluetooth Device
- Using Cellphones
- Using Smart Access
- Using an Optional Remote Control
- Using an Optional Rear Camera
- Using an Optional Rear Seat Monitor
- Menu Settings
- Troubleshooting
- Specs
- Installation and Connections
- Index
- Navigation Owners Manual (Supplied on CD-ROM)
- Addendum Sheet - About the Audio Pause Function
- Corrections to Supplied Documentation
- Scan of CD-ROM
- Warranty
44 NX603/FX503
English
●
Audio related
Bluetooth audio
Cannot connect Correctly connect the Bluetooth-compatible
cellphone.
p
P.29
Turn the audio device on.
The unit sometimes cannot be connected
or skipping sometimes happens depending
on distance and where the Bluetooth Audio
is installed. Situate the audio device so the
reception is as good as possible.
Audio is not played. Use audio devices that are compatible with
AVRCP.
Cancel the connection and reconnect.
Start up the player for the connected audio
device.
The track name, artist name and
album name are not displayed.
Use audio devices that are compatible
with AVRCP1.3. Restart the player on the
Bluetooth Audio device side.
Sound is no longer output from the
connected audio device.
Specify the Bluetooth Audio device from the
Bluetooth setting screen.
Smartphone linking
Symptom Remedy
An error message is displayed and
Smartphone linking is not possible.
Cancel the sleep state on the smartphone.
Install the linking-compatible application and
application management software “Smart
Access” on the smartphone beforehand.
Start up the linking-compatible application on
the smartphone beforehand.
Reconnect the smartphone in a place with
good reception.
Disconnect the connector cable and
reconnect it.
Check the OS setting on the unit.
In the case of Android smartphones, enable
the HDMI output setting on the smartphone.
Also, check to see if the smartphone supports
Bluetooth SPP and HID profiles.
“!” cannot be touched in the Smartphone
linking screen on the unit, and the
application cannot be updated.
For reasons of safety, the application cannot
be updated during Smartphone linking.
Disconnect the connector cable and update
the application on the smartphone.
The Smartphone linking screen is not
displayed, and the screen is black.
Check to see if the connector cable is
connected properly.
In the case of Android smartphones, check
to see if the HDMI output resolution of your
smartphone can be displayed on the unit.
The error screen is displayed in the
Smartphone linking screen after an
outgoing call is made.
In some versions of the smartphone OS,
Smartphone linking is sometimes canceled
after an outgoing call is made.
Start up Smart Access from the Home screen
by operating on the smartphone.