Operation Manual

NX504E/FX504E 33
English
Correcting the touch
position on screen (Android
smartphones only)
During Smartphone linking, the positions
of keys displayed on the unit is sometimes
deviate from the actual touch position
because of different resolutions on the unit
and the smartphone. This deviation can be
automatically corrected by the following
procedure.
1
During Smartphone
linking
Smart Access
.
The side menu is displayed.
2
3
Yes
No:
This cancels correction of the
touch position.
Reset to Factory Setting:
This resets the touch positions after
correction to their factory settings.
4
Touch the + mark at the top left
of the screen.
5
Touch the + mark at the bottom
right of the screen.
This completes correction of the
touch position.
Ending Smartphone linking
1
MENU
2
Disconnect CCA-750 or HDMI
cable.
Starting up applications
Notice
•Theunitsometimesdoesnotsupport
smartphonemulti-touchorflicking
functions.
•Applicationscannotbeaddedordeleted
fromtheunit.Executeadditionordeletion
ofapplicationsonthesmartphone.
•DuringSmartphonelinking,donotset
thesmartphonetoasleepstate.Doing
somightpreventthesmartphonefrom
functioningproperly.
MEMO:
•WhenSmartAccessisusedforthefirst
time,theTermsofUseconfirmation
screenisdisplayed.Checkthetermsof
use,andtouch Check .
•“!”willbedisplayedwhenthereisa
newversionofSmartAccessavailable.
ToupdateSmartAccess,removethe
smartphonefromtheunit,andexecute
theupdatebyoperatingtheapplicationon
thesmartphone.
1
MENU Smart Access
Start up Smart Access. The list of
linking-related applications installed
on the smartphone is displayed.
When an application is started up
on the smartphone, the screen is
switched to the application screen.
2
Select the application you want
to start up.
The application starts up. The
application can be operated from
screens on the unit as if you are
operating the smartphone.
Touch
MENU
Smart Access to
return to the application list screen.
Adjusting the screen size
(Android smartphones only)
During Smartphone linking, the left and
right, or top and bottom of the screen
sometimes displays black because of
different resolutions on the unit and the
smartphone. The screen size can be
corrected by the following procedure.
Notice
•Ifyoucannottouch
,updateSmart
Accessonthesmartphone.
1
During Smartphone
linking
Smart Access
.
The side menu is displayed.
2
:
The screen returns to the
application list screen.
:
The screen returns to the previous
screen when the screen is not
displayed the application list
screen.
:
This hides the side menu.
3
Adjust the screen size.
:
This reduces the height of screen
size.
:
This increases the height of screen
size.
:
This reduces the width of screen
size.
:
This increases the width of screen
size.
Reset to Factory Setting:
This resets the screen size after
correction to their factory settings.
Back:
This cancels the settings and
displays the application list screen.
4
OK
5
Check
After adjusting the screen size, go
on to correct the touch position on
screen.