Operation Manual
32 NX504E/FX504E
English
MEMO:
•WithsomeAndroiddevices,theHDMI
outputsettingonthesmartphonemustbe
enabled.
Also, with this function, only applications
compatible with Smartphone linking can be
used. This User’s Manual refers to these as
“linking-compatible applications.”
Attention
•UseofSmartphonelinkingfunctionis
chargedtosmartphonecommunications
fees.Chargesarebornebytheperson
contractedtothesmartphonebeing
used.Chargesbilledfromthecellphone
carriermaybeexpensivedependingon
themethodofuse.Beforeuse,checkthe
priceplansandmethodsofusewiththe
cellphonecarrieryouarecontractedto.
Werecommendusingtheoptimumprice
plan,suchasaflat-ratedataplanbased
onthefrequencyofuse.
Notice
•Whileyouaredriving,someapplications
cannotbeoperatedsoastoprevent
obstructiontodriving.
•Informationcontentthatisdistributedin
realtimebelongstothirdpartieshaving
therightsconcerned.Thecontentof
servicesmightbechangedorsuspended
forreasonsofthirdpartieshavingthe
rightsconcerned.
❏
Linking-compatible
applications
To use Smartphone linking, linking-
compatible applications and application
management software “Smart Access” must
be installed on the software.
First, search for “Smart Access” from the
App Store
SM
or Google Play
TM
and install
this.
Next, install the linking-compatible
applications. Start up Smart Access on
the smartphone and install the linking-
compatible applications from recommended
lists.
Linking-compatible applications are
scheduled to be added as they become
available.
For details on how to use applications,
refer to the Help for each application that is
started up on the smartphone.
❏
Procedure up to Smartphone
linking
The Smartphone linking procedure is as
follows.
Notice
•DuringSmartphonelinking,operationson
theiPhonearenotpossible.
(For iPhone)
1. Set “iPhone” for “Linked device” on
the Settings menu.
P.41
2. Start Smart Access on the iPhone.
3. (Only for the device with Lightning
connector)
Set “Usage Setting” in “BT Devices
Connection” on the Settings menu,
and then connect iPhone via
Bluetooth.
P.28
4. Connect the iPhone to the unit
For the device with 30-pin connector,
connect iPhone with the CCA-750 video
jack (sold separately) still connected to
the VTR cable.
For the device with Lightning connector,
the Apple Lightning-Digital AV adaptor
(sold separately) and the HDMI cable
(sold separately) are necessary.
MEMO:
•ForthedevicewithLightningconnector,
themusicandvideointheiPhonecannot
beplayedfrom USB / iPod onthemain
menuscreen.PleaseusetheSmart
Accesslinking-compatibleapplication
“Media4car”.
5. Start the application on the unit.
(For Android smartphones)
1. Set “Android” for “Linked device” on
the Settings menu.
P.41
2. Start Smart Access on the
smartphone.
3. Set “Usage Setting” in “BT Devices
Connection” on the Settings menu,
and then connect your smartphone
via Bluetooth.
P.28
4. Connect the unit to the smartphone.
The following two connection methods
are also available for some smartphones.
The unit
HDMI cable
(sold separately)
Connect to the
cigarette lighter port,
etc. on the vehicle to
supply power.
HDMI conversion cable
(commercially available
product)
1. For MHL connection
2. For HDMI connection
The unit
HDMI cable
(sold separately)
Attention
•UseonlyanHDMIconversioncablethat
supportsEDIDtransfer.
5. Start the application on the unit.