Operation Manual

NX503E/FX503E 25
English
:
Only the track currently being
played is repeated.
:
All tracks in the group currently
being played are repeated.
:
All tracks in the Bluetooth Audio
device are repeated.
:
All song shuffle or group shuffle is
canceled.
:
All tracks in the group currently
being played are played at random.
:
All tracks in the Bluetooth Audio
disc are played at random.
3
Touch the Trick Play key.
The screen returns to the previous
screen.
Viewing connected
external devices (AUX)
Audio and video from external devices
connected to the AUX terminal can be
played on the unit by switching the audio
mode to AUX1 or AUX2.
WARNING
• If the driver wants to view TV or
video, he or she should always stop
at a safe place before doing so.
Preparations
●
The following cables are required for
connecting external devices to the unit.
(When using AUX1)
•CCA-772 (3.5 mm AV mini plug-RCA
[L/R/V] cable) or 3.5 mm stereo mini
plug cable
(When using AUX2)
•VTR cable
Attention
• Do not leave connected external devices
inside the vehicle. The inside of the
vehicle gets hot under the blazing sun,
for example, and might cause them to
malfunction.
Notice
• For safety’s sake, view TV or video images
only when the vehicle has stopped. While
you are driving, you can enjoy only audio.
Connecting external devices
<Connection example> When using AUX1
✽
The illustrations for the main unit are of the NX503E.
(Example: For audio)
3.5 mm AV mini plug cable (sold separately)
Commercially available
portable device
<Connection example> When using AUX2
✽
The illustrations for the main unit are of the NX503E.
Audio jack AUDIO IN
Video jack VIDEO IN
Commercially available
portable device
VTR cable
MEMO
• Also refer to the User’s Manual for the
connected external device.
• External input connector jack
- A 3.5 mm dia. stereo mini plug can
be connected. Thoroughly read the
User’s Manual for the audio cable
(without resistor) and the device to be
connected.
- Use the battery, etc. provided with the
device as the power supply for that
device. Using an external device while
it is being charged by the accessory
socket on the vehicle sometimes
causes noise.
• The screen momentarily turns black when
switching between the audio and video
modes. However, this is not a malfunction.
Listening to audio
from external devices
1
MENU AUX1
or
AUX2
2
Touch the screen
Audio
3
Operate the external device.
Audio is played.