Owner`s manual

13
English
NX502E
[OK] buttons. Touch [X] button to delete a
digit inputted. Touch [Back] to exit.
• ParentalControl
Touch the button to the right of “Parental
Control” to show parental control menu.
Enter password, then select a parental
level. Touch [OK] to conrm or [Back] to
exit.
Navigation
• NavigationInterrupt
Select navigation interrupt On, Pop-Up or
Off.
• VoiceGuidance
ON: Interrupt function of voice guidance
is on. While interrupting no attenuate
function of AV sound.
MUTE: Interrupt function of voice guidance
is on. While interrupting attenuate function
of AV sound is on.
OFF: Interrupt function of voice guidance
is off. While interrupting no attenuate
function of AV sound.
Anti Theft
• AntiTheftcode
You can set an Anti-theft code. After set
successfully, when Battery wire reconnect,
you need to input the Anti-theft code.
1. Long press the [General] button until a
dialog box popped up. Touch [Yes] to set
a personal code of Anti-Theft.
2. Input a 4-digit code. Touch [OK] to conrm.
Then input it again for conrmation.
3. To remove the code, long press the
[Ge n eral ] button and input the old
password.
Note:
Please make a note of the Anti theft code not
to forget. if the right code is not inputted, it
becomes impossible to operate this unit.