Operation Manual

41NX501E/NZ501E
English
English
Owner’s Manual
Note:
•Youcannotregisterthesamecellularphonewhichis
alreadyregistered.IfyouwishtochangetheCellular
key registered, once delete the corresponding cellular
phone from the current Cellular key, and then register it
again to your desired Cellular key.
•Todeletethecellularphoneregistration
1. Touch the [ ] key to delete the device.
Aconrmationscreenisdisplayed.
2. Touch the [ ]keytoconrmdelete.
Select the cellular phone
To change the current cellular phone to the other
device which is already registered, perform the
following operation.
1. Touch the [ ] key to display the Device Select
screen.
2. Touch the currently connected device, then press
[
] key to disconnect the active device.
3. Touch the desired Device key you wish to use. Press
[
] key to select it as your active device. The
corresponding cellular phone is set as the current
telephone.
• Ifthepowerofthecellularphoneisnotturnedon,
turn it on.
• Thecellularphonemayprompttoacknowledgethe
BluetoothconnectionortoenterthePassKeycode
of this unit. Perform these operations according to
the message displayed.
4. Touch the [ ] key to return to the previous
screen.
Obtaining the Phone Book data
Sending the Phone Book data from the cellular phone
enables you to make a call using the Phone Book
function from this unit.
1.PerformtheObjectPushtransferoperationofthe
Phone Book data on the current cellular phone.
For details of the operation, see the operation manual
of the cellular phone.
Note:
•Somecellularphonesmaynotbeabletotransferthe
Phone Book data.
•SomecellularphonescannottransferthePhoneBook
datawhenthehands-freemodeissetoritisalso
registeredintheBluetoothmode.Inthosecases,
disable these functions from the cellular phone before
performingtheObjectPushtransfer.
•SomecellularphonesmaytransferPhoneBookdata
automatically.
Telephone operations
Making a call using the Ten-Key pad
1. Touch the [ ]keytodisplaytheTen-Keypad
screen.
2.EnterthetelephonenumberbyusingtheTen-Key
pad displayed on the screen.
3. Touch the [ ] (Send) key to call the entered
number.
• ThefollowingTelephoneInterruptscreenis
displayed during phone call.
• Touchthe[ ] key to talk by using the cellular phone
and canceling the hands-free function (Private
Mode). To return to the hands-free mode, touch the
[
] key again.
• Touchthe[ ] key to mute the microphone.Now you
can hear the other side, but the other side cannot
hear your side.
• Touchthe[ ] key to hold the current phone call,
now you can answer to the other incoming call.
Touch again to talk with previous call
4. When the call is finished, touch [ ] key to hang
up.
Note:
•Dependingonsomespecialcellularphone,the
TelephoneInterruptscreenmaybeclosedandthe
connection with this system may be disconnected
when entering the Private mode.