Owner's Manual
Table Of Contents
- Owners / Installation Manual
- Reset
- Clock Set
- Table of Contents
- Features
- Supplied Accessories
- Parts & Controls
- Operation
- Basic Operations
- Remote Control
- Main Menu Operations
- DVD System
- DVD Video Player Operations
- DVD Audio Player Operations
- USB Audio Operations
- USB Video Operations
- iPod / iPhone Operations
- Bluetooth Audio Player Operations
- Bluetooth Telephone Operations
- Radio Operations
- HD Radio Receiver Operations
- SIRIUS Satellite Radio Operations
- AUX 1 / AUX 2 Operations
- Camera In Operations
- Rear Source Operations
- Setting Operations
- Monitor Off
- Menu Operation
- Troubleshooting
- Error Displays
- Specs
- Installation
- Clarion Mobile Map User Manual
- Warranty
62 NX501/NZ501
English
Owner’s Manual
Installing the Main Unit in TOYOTA Vehicle
Install by using parts attached to the vehicle. (Screws marked are attached to the vehicle.)
*2. Some panel openings are too small for the unit
depending on the vehicle type and model. In such
a case, trim the upper and lower sides of the panel
frame by about 0.5 to 1.5 mm so the unit can be
inserted smoothly.
*3. If a hook on the installation bracket interferes with
the unit, bend and atten it with a nipper or similar
tool.
* 3
Figure 7
Main Unit
8-Hexagonal screw
(M5 8)
Mounting bracket
(1 pair for the left
and right sides)
Center Panel
(
* 2 )
8- Hexagonal screws
(M5x8)
Figure 7
Mounting bracket
(1 pair for the left and
right sides)
Vehicles other than NISSAN and TOYOTA
In some cases the center panel may require modification. (Trimming, filing, etc.)
• Removing the Main Unit
When the main unit is to be removed, disassemble it in the reverse of the order in
“INSTALLING THE MAIN UNIT”.
3elpmaxE1elpmaxE Example 2
Affix the screws to the
marks.
Typical Mounting Brackets