Owner's Manual
Table Of Contents
- Owners / Installation Manual
- Reset
- Clock Set
- Table of Contents
- Features
- Supplied Accessories
- Parts & Controls
- Operation
- Basic Operations
- Remote Control
- Main Menu Operations
- DVD System
- DVD Video Player Operations
- DVD Audio Player Operations
- USB Audio Operations
- USB Video Operations
- iPod / iPhone Operations
- Bluetooth Audio Player Operations
- Bluetooth Telephone Operations
- Radio Operations
- HD Radio Receiver Operations
- SIRIUS Satellite Radio Operations
- AUX 1 / AUX 2 Operations
- Camera In Operations
- Rear Source Operations
- Setting Operations
- Monitor Off
- Menu Operation
- Troubleshooting
- Error Displays
- Specs
- Installation
- Clarion Mobile Map User Manual
- Warranty
48 NX501/NZ501
English
Owner’s Manual
18. AUX 1 / AUX 2 OPERATIONS
External peripheral devices, including a game console, camcorder, iPod/iPhone, etc. can be connected to the AUX
1 or AUX 2 connector on the front or back of this unit using the A/V media cables.
Switching to AUX IN / AV IN mode
• Press [AUX 1] or [AUX 2] button on Main Menu to select desired mode (when unit is reading). If the external
device connected to AUX 1or AUX 2 input have audio signal, the unit will broadcast audio of external device.
• Press [Menu] button on Operational Panel to return to the Main Menu.
You cannot directly control external devices connected to AUX 1or AUX 2 input.
19. CAMERA IN OPERATIONS
Switching to Camera mode
Press [Camera] button on Main Menu to select desired mode.
The LCD will display the external camera video. The screen will display “No Video Signal” menu, if a valid camera
is not connect to this head unit.
Press Menu button on Operational Panel to return to the Main Menu.
Note:
If the reverse cable is connected correctly to the car, the center unit to switch to camera mode automatically when the
car is in reverses.