Owner's Manual
Table Of Contents
- Owners Manual
- Features
- Table of Contents
- File / Format Compatibility
- USB Device Compatibility
- Supplied Accessories
- Parts & Controls
- Basic Operation
- Radio Operation
- DVD Video Player Operation
- Sirius Satellite Radio Operations
- Navigation System Operations
- iPod / iPhone Operation
- USB Operation
- Bluetooth Audio Player Operations
- HD Radio Operations
- AUX In / AV In Operations
- Setup Operations
- Troubleshooting
- Error Displays
- Specs
- Installation / Wire Connection Guide
- Correction to Manual
English
NX500/NZ500 59
English
Owner’s Manual
6. Cautions on Wiring
1. Be sure to turn the power off before wiring.
2. Be particularly careful where you route the wires.
Keep them well away from the engine, and
exhaust pipe, etc. Heat may damage the wires.
3. If the fuse should blow, check to see if the
wiring is correct.
If a fuse is blown, replace it with a new one of
the same amperage rating as the original (15A FUSE).
4. To replace the fuse, remove the old fuse on the back
of the unit and insert the new one. (Figure 8)
NOTE:
There are various types of fuse holder. Do not let the battery
side touch other metal parts.
CAUTION
caution
After the connection, fix the cord by a clamp
or insulation tape for protection.
Fuse (15A FUSE)
Fuse holder
Figure 8
Figure 8