Owner`s manual

$;0
tu :E
::J ::J
c: (1)
tu .....
-(f)
Power does not turn on.
(No sound is produced.)
Nothing happens when
buttons are pressed.
Display is not accurate.
USB DEVICE
Fuse is blown.
Incorrect wiring.
The
microprocessor
has malfunctioned
due to noise, etc.
Replace with a fuse
of the same amperage. If the
fuse blows again, consult your store
of purchase.
Consult your store
of purchase.
Turn off the power and open the operation panel.
Press the reset button with a thin rod.
Note:
When the Reset button is pressed, turn off the ACC
power.
* When the Reset button is pressed, frequencies
of radio stations, titles, etc. stored in memory are
cleared."
.... "''''./ ".
. '"
.
. 'C8iIE);~;>~f >..;'
~,;".<."c;·::;·ti&~fg.
·,:;~1~.i:~.·· : ....
ProbII"", ',' ,... .
,c.
.
",. .... . "
.ti)' .- .:.;
" .
USB device cannot be The USB device has
Reversing the connection direction
of the
inserted.
been inserted with wrong USB device, try it again.
direction.
The USB connector is
Replace with a new USB device.
broken.
USB device is not recognized.
The USB device is Disconnect the USB device and
damaged. reconnect. If the device is still not
Connectors are loose.
recognized, try replacing with a different
USB device.
16 NP400