Owner's Manual
Table Of Contents
- Owners Manual
- Using This Manual
- Proper Handling
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Basic Operation
- Entering a Destination
- Route Guidance
- System Settings
- Favorite & Frequent Menu
- Troubleshooting
- Messages
- About Positioning Errors
- Specs
- Installation Manual
- Warranty
Wire Connection
Be sure to read the section "Safety Precautions" before installation or connection operations.
Example
of
connecting to the MAX675VD
Pink Speed sensor
r;======::::::::::::=::::, Connect to the engine control computer vehicle speed signal line.
For details, see "Connecting to the Speed Sensor".
;l~
-====1=~~1
Main power supply
F5~uAse
,
[I
r-
Connect to the +12V power supply
~
Yellow where power source
is
always supplied.
r
®Powersup~
I
Green
Handbrake
Connect to the handbrake lamp cord.
After connecting, pull the handbrake and check that
the line falls to ground.
" Some functions will not operate unless you connect
to
the
handbrake.
:'
This is a safety mechanism. Connect correctly.
Reverse gear signal
Connect to the
+ terminal for the reverse
gear lamp that
is
only fed when
the transmission is put
in
reverse.
Ground
Connect to a metal part of the vehicle to connect ground.
Pur Ie/white
Black
MAX675VD
@ GPS antenna
®~GBCable
y
))
~
® CeNET cable
NAX970HD
9