Owner's Manual
Table Of Contents
- Owners Manual
- Using This Manual
- Proper Handling
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Basic Operation
- Entering a Destination
- Route Guidance
- System Settings
- Favorite & Frequent Menu
- Troubleshooting
- Messages
- About Positioning Errors
- Specs
- Installation Manual
- Warranty
Service Options
Restoring User Data
You can restore data backed up via USB
memory to the hard disk.
Note:
When you perform backup/restore
of
data
of
two
different navigation systems, the stored data on the
restored system will be lost. Be sure
to
back up data
of
the system
to
restore
to
before performing the
restore operation.
"Restore User Data" :
When touching the [Restore] key, a screen with
confirmation message appears. Operate
according to the guidance
on
the screen
displayed.
Resetting to the Factory
Settings
You can return the navigation system to the
status after purchase.
Note:
When the system
is
reset
to
the factory settings, all
stored data
is
erased. It is recommended that you
backup all data you want
to
keep.
"Reset to Factory Setting" :
When touching the [Reset] key, a screen with
confirmation message appears. Operate
according to the guidance
on
the screen
displayed.
Screen Adjustment
The position and sharpness of the displayed
screen can
be
adjusted.
"Screen Adjustment" :
After touching the [Adjust] key, adjust the screen
position by touching the
[<J,
[AJ,
[>]
and
[v]
key.
Touch the
[1]
or [2] key to select a setting at
which the screen
is
displayed clearly.
NAX970HD
49