Owner's Manual
Table Of Contents
- Owners Manual
- Using This Manual
- Proper Handling
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Basic Operation
- Entering a Destination
- Route Guidance
- System Settings
- Favorite & Frequent Menu
- Troubleshooting
- Messages
- About Positioning Errors
- Specs
- Installation Manual
- Warranty
Outline
of
Destination Entering Procedures
To start route guidance, operate the navigation system with the following procedure:
.Select
the
method
of
searching
destination
from
the
Destination
menu
screen,
then
search
for
the
desired
destination.
Select a suitable searching method according to the place to search.
•
Confirm
the
position
of
the
place
found
with
the
Set
Location
menu
screen
or
Place
menu
screen,
then
set
the
destination.
You can store the place found to the Address Book, or can confirm the information according to the
place, as well as set it as destination.
•
Start
the
route
guidance
from
the
Set
Route
menu
screen.
You can also display other suggested routes, or confirm information of the route.
Other than the above procedure, you can also enter the destination by scrolling the map or from the
Favorite
& Frequent menu.
Setting destination
by
entering the address
This section explains the basic operation procedure to set the destination
in
detail, using the example to
specify the destination by entering the address from the Destination Menu. Read this explanation
thoroughly because this procedure
is
similar to other destination entering methods.
For other destination entering methods, see
"Entering
the
Destination"
(P. 25).
1.
In
the navigation mode, press the [MENU]
button of the main unit.
The Top menu (Destination menu) of the
navigation system is displayed.
2.
Touch the
[Address]
key.
The Address input screen
is
displayed.
3.
When the region name you wish to go is not
displayed, touch the [Region] key (When the
Address screen
is
displayed, the previous
region name
is
displayed).
Then, the list of region names is displayed.
4.
Touch the region name you wish to go.
The specified region name
is
displayed.
[A]
/
[.]
Scrolls the list up or down by one item.
[~]
/
[~]
Scrolls the list by one page.
5.
Touch the
[Address
No.] key.
The address number input screen
is
displayed.
Note:
You can also specify the city name you wish to go
to
before touching the
[Address
No.} key. Touch the
[City} key, enter the city name, touch the [OK} key,
and
then select the city name from the displayed list.
NAX970HD
23