Owner`s manual

English
Installation and Wire
connection manual
72 VRX848RVD/VRX743R
∗1: In certain vehicles - Volkswagen/Opel/Vauxhall - it is necessary to exchange the accessory
<<Red>> and the main power <<Yellow>> connection, to avoid overload and loss of memory.
∗2: When the unit is installed in a 1998 or later Volkswagen model, make sure to interrupt the
<<Remote>> output. Disconnect the <<blue/white>> wire and insulate the front ends of this
lead.
A breakdown may occur if the lead is not disconnected, or front ends are not insulated.
∗3: Connecting the PHONE MUTE Terminal
The lead included with the unit must be connected to the specified position of the vehicle’s
connector in order to use the “triggered audio mute for cellular telephones” function.
Note : Before making any installation, disconnect the car battery – (negative) cable.
∗4: Connect to a separately sold external amplifier with a separately sold RCA cord (L, R).
∗5: Connect to a Rear View Monitor (sold separately) for the rear seat.
8. WIRE CONNECTION
RGB-
terminal
CeNET
terminal
Red
White
Red
White
Right
Left
Front audio output (*4)
Right
Left
Rear audio output (*4)
Right
Left
Non fader output
Gray
Black
Purple
Red
White
Yellow
Yellow
Yellow
Video output (*5)
TV tuner input
DVD changer input
MINI DIN 8P connector
Optical output connector
(VRX848RVD only)
Radio antenna jack