Owner`s manual

English
Owner’s manual
VRX848RVD/VRX743R 55
Information standby mode
When the INFORMATION programme selected
in the “INFO SEL” display of the adjustment
mode starts, the unit switches to the selected
INFORMATION programme automatically.
∗ For details on “Information select”, refer to the
section “Information select”.
1. Press the [TA] button, for 1 second or longer,
“INFO” lights in the display and the unit is set
to Information standby mode until information
starts.
∗ If you press the [TA] button while the
INFORMATION programme is being
broadcast, the programme broadcast is
cancelled and the unit enters Information
standby mode.
2. To cancel Information standby mode, press
the [TA] button again for 1 second or longer.
Notes:
• Only in case of DAB connection, this can be
operated even in the RDS tuner mode.
• The same operation can be performed by the
touch key on the screen instead of the [TA]
button.
Touch the screen switching touchkey when the
MAIN screen is showing or press the [LIST]
button, the MENU screen appears.
Touch the [SUB] key in the MAIN screen and
the [TA] key appears in the display.
Information select
This function allows selecting a type of
INFORMATION on INFORMATION interrupt
mode. You can set any of the 6 types of INFO
below:
TRAVEL, WARNING, NEWS, WEATHER ,
EVENT, SPECIAL
∗ This function is enabled only when the panel is
open.
1. Touch the [SUB] key, and then touch the
[INFO SELECT] key.
2. Touch the INFOMATION select key to select
a desired INFORMATION.
3. Touch the INFOMATION select key to select
ON or OFF and to set it.
4. When the setting is finished, touch the [RTN]
key to return to the MAIN display.
PTY
This function enables you to listen to the
selected programmes type, irrespective of the
function mode.
∗ RDS interrupt does not function during AM radio
reception or in TV mode.
∗ DAB and RDS have the same PTY.
∗ You can select one PTY from DAB or RDS.
∗ PTY broadcast are not yet available in all
countries.
∗ In INFO standby mode, INFO stations have
priority over PTY stations.
∗ In TA standby mode, TP stations have priority
over PTY broadcasting station.
Selecting PTY
1. Touch the [SUB] key in the MAIN screen.
Touch the [PTY SELECT] key, and the
[PRESET] key appears in the display.
When you touch the [PRESET] key, the unit
goes into PTY select mode.
2. Press any one of the [DIRECT] buttons to
select the desired PTY.
∗ Below are the factory default settings stored
for [DIRECT] buttons.
1
2
3
4
5
6
News
Information
Pop music
Sport
Classics
Easy listening music
Preset
number
PTY item
ContentsENGLISH
News
Info
Pop M
Sport
Classics
Easy M
3. The PTY select mode is cancelled
automatically 7 seconds after a PTY is
selected.
● Cancelling PTY standby mode
Touch the [SUB] key in the MAIN screen, the
[PTY] key is appeared.
Touch the [PTY] key and “ON” switches to
“OFF” and the PTY standby mode is cancelled.
Digital Radio/DAB Operations