Owner`s manual

English
Owner’s manual
54 VRX848RVD/VRX743R
Service scan
This function scans through each receivable
programme in a DAB station being received for
10 seconds sequentially. This is useful when
you want to search for a desired programme.
1. Press the [FUNC] button to receive a DAB
station.
2. Press the [LIST] key in the MAIN screen and
press the [S.SCN] key. The unit starts
scanning each programme for 10 seconds
sequentially.
3. When a programme which you want to listen
is turned in, press the [DIRECT] button.
AF function
The AF function switches to a different
frequency on the same network in order to
maintain optimum reception.
∗ The factory default setting is “ON”.
● Switching OFF the AF function
Touch the [SUB] key in the MAIN screen, the
[AF] key appears in the display.
Touch the [AF] key and “ON” switches to “OFF”.
The “AF” indication goes off.
● Switching ON the AF function
Touch the [SUB] key in the MAIN screen, the
[AF] key appears in the display.
Touch the [AF] key and “OFF” switches to “ON”.
The “AF” indication lights.
∗ If the reception of the current broadcast station
deteriorates, “SEARCH” lights in the display and
the radio searches for the same programme on
another frequency.
∗ When AF is ON, if the reception of an RDS
broadcast deteriorates, the AF indication flickers.
● AF function between RDS and DAB
When the same programme is broadcast by
both RDS and DAB, and this function is ON, the
unit switches automatically to the broadcast with
the better reception.
∗ This function only operates when the DAH923
DAB unit, sold separately, is connected.
1. Press the [ADJ] button to show the
adjustment selection display.
2. Touch the [GENERAL] key, and then touch
the [z] key.
3. Touch the [LINK ACT] key to select “ON” or
“OFF”.
● ON:
AF switching between DAB and RDS
enabled.
● OFF:
AF switching between DAB and RDS
disabled.
4. Press the [ADJ] button to return to the
previous mode.
TA (Traffic Announcement)
In TA standby mode, when a traffic
announcement broadcast starts, the traffic
announcement broadcast is received as top
priority regardless of the function mode so you
can listen to it. Traffic programme (TP)
automatic tuning is also possible.
∗ RDS interrupt does not function during AM radio
reception.
∗ This function can only be used when “TP” is lit in
the display. When “TP” is lit, this means that the
RDS broadcast station being received has traffic
announcement programmes.
● Setting TA standby mode
If you press the [TA] button when only “TP” is lit
in the display, “TP” and “TA” light in the display
and the unit is set into TA standby mode until a
traffic announcement is broadcast. When a
traffic announcement broadcast starts, “TRA
INFO” appears in the display. If you press the
[TA] button while a traffic announcement
broadcast is being received, the traffic
announcement broadcast reception is cancelled
and the unit goes into TA standby mode.
● Cancelling TA standby mode
With “TP” and “TA” lit in the display, press the
[TA] button. The “TA” indicator in the display
goes off and TA standby mode is cancelled.
∗ If “TP” is not lit, pressing the [TA] button searches
for a TP station.
● Searching for a TP station
When “TP” is not lit, if you press the [TA] button,
the “TA” in the display lights and the unit
automatically searches a TP station.
• The same operation can be performed by the
touch key on the screen instead of the [TA]
button.
Touch the screen switching touchkey when the
MAIN screen is showing or press the [LIST]
button, the MENU screen appears.
Touch the [SUB] key in the MAIN screen and
the [TA] key appears in the display.
Digital Radio/DAB Operations