Owner`s manual

English
Owner’s manual
VRX848RVD/VRX743R 33
RDS Operations
TA (Traffic Announcement)
In TA standby mode, when a traffic
announcement broadcast starts, the traffic
announcement broadcast is received as top
priority regardless of the function mode so you
can listen to it. Traffic programme (TP)
automatic tuning is also possible.
∗ RDS interrupt does not function during AM radio
reception or in TV mode.
∗ This function can only be used when “TP” is lit in
the display. When “TP” is lit, this means that the
RDS broadcast station being received has traffic
announcement programmes.
● Setting TA standby mode
If you press the [TA] button when only “TP” is lit
in the display, “TP” and “TA” light in the display
and the unit is set into TA standby mode until a
traffic announcement is broadcast. When a
traffic announcement broadcast starts, “TRA
INFO” appears in the display. If you press the
[TA] button while a traffic announcement
broadcast is being received, the traffic
announcement broadcast reception is cancelled
and the unit goes into TA standby mode.
● Cancelling TA standby mode
With “TP” and “TA” are lit in the display, press
the [TA] button. The “TA” in the display goes off
and TA standby mode is cancelled.
∗ If “TP” is not lit, pressing the [TA] button searches
for a TP station.
● Searching for a TP station
When “TP” is not lit, if you press the [TA] button,
“TA” lights in the display and the unit
automatically searches a TP station.
Notes:
• If a TP station is not received, the unit continues
the search operation. Pressing the [TA] button
again makes the “TA” indicator go off and stops
TP station searching.
• The same operation can be performed by the
touch key on the screen instead of the [TA]
button.
Touch the screen switching touchkey when the
MAIN screen is showing or press the [LIST]
button, the MENU screen appears.
Touch the [SUB] key in the MAIN screen and
the [TA] key appears in the display.
1
2
3
4
5
6
News
Information
Pop music
Sport
Classics
Easy listening music
Preset
number
PTY item
ContentsENGLISH
News
Info
Pop M
Sport
Classics
Easy M
Auto store function for TP stations
You can automatically store up to 6 TP stations
into preset memory. If the number of TP that can
be received is less than 6, broadcast stations
already stored in memory are left without being
overwritten.
1. With “TA” lit in the display, touch the [LIST]
key in the MAIN screen to select the [AUTO
STORE] key.
Touch the [AUTO STORE] key for 2 seconds
or more.
2. The TP stations with the good reception
condition are stored into preset memory.
∗ Even if you select FM1 or FM2, a TP station is
stored into memory for FM3.
PTY
This function enables you to listen to a
broadcast of the selected programme type when
it starts, even if the unit operates on a function
mode other than radio.
∗ RDS interrupt does not function during AM radio
reception or in TV mode.
∗ Some countries do not yet have PTY broadcast.
∗ In TA standby mode, a TP station has priority over
a PTY broadcast station.
Selecting PTY
1. Touch the [SUB] key in the MAIN screen.
Touch the [PTY SELECT] key, and the
[PRESET] key appears in the display.
2. Touch the [PRESET] key and the unit goes
into PTY select mode.
3. Press any one of the [DIRECT] key to select
a desired PTY.
∗ Below are the factory default settings stored
for the [DIRECT] key.
4. The PTY select mode is cancelled
automatically 7 seconds after a PTY is
selected.