English Quick Reference Guide N.I.C.E. 430 Portable Navigation System N.I.C.E. 430 NICE430QuickReference.
Components Vehicle charging cable Secure Digital/ MultiMediaCard slot Connector for optional external GPS antenna Mounting pad Cradle attached to mounting bracket Speaker Stylus English English Included accessories 1.
English English After the first time, briefly press to enter “sleep mode.” Press power briefly again to turn the power fully on. To fully power off, press and hold the power button until the Bluetooth indicator flashes blue one time. 2. Remove the stylus from its storage compartment. Selecting the language and setting the time Charge indicator These steps are required the first time you use the N.I.C.E. 430. 1. Tap Settings > Language. The Switch Language screen appears.
You may use the N.I.C.E. 430 to navigate while you drive by mounting it in a vehicle or as a pedestrian by holding it in your hand. Attaching the mounting bracket to the vehicle 2. If mounting on the dashboard, remove the backing on the mounting pad and attach the pad to the dashboard. If mounting on the windshield, you don’t need the mounting pad. 3. Place the mounting bracket in position with the suction cup touching the mounting pad or the windshield. English English 2. NAVIGATING 4.
Navigating to a destination 1. Tap the navigation icon on the Main menu. It takes approximately 10 seconds to load the map and display the navigation menu. CAUTION To protect the N.I.C.E. 430 from receiving a sudden surge of current, start the ignition before plugging into the cigarette lighter. 1. Start the vehicle’s ignition. 2. Plug in the mini-USB end of the Vehicle charging cable into the USB connector on the bottom edge of the N.I.C.E. 430.
Zoom in GPS position and quality Zoom out Volume Map scale (drag to zoom) Tilt up Tilt down Cockpit Main menu Turn preview & Route menu Next street Destination Compass (tap for overview) Battery status Track log to record or playback route Distance to next turn Route data Next turn approach Main menu Tilt up Tilt down Cursor: Red bulls eye that serves as the starting point, via point, destination or POI.
The Secure Digital/MultiMediaCard (SD/MMC) slot on the top of the N.I.C.E. 430 supports up to a 2 GB SD card (for music and or pictures). 1. Make sure that no audio file is being played or no photos are being displayed by returning to the Main menu. Inserting a SD/MMC card 2. Slightly push in on the top edge of the card. The N.I.C.E. 430 releases the card. Insert card with the connector toward the slot and the label side up. English English Removing a SD/MMC card 3. PLAYING MUSIC 3.
Select default profile 5. SETTINGS Exit without confirmation Confirm selection and exit Cycle through options: Normal, Hall, 3D, Soft, Disco, Heavy, Dance, Classic, Jazz, Pop and Rock Darken backlight Lighten backlight Decrease volume Increase volume English English Equalizer panel 4.
The built-in Bluetooth phone interface works together with your Bluetooth-enabled mobile phone to provide hands-free calling. English English Placing a call 6. Hands-free phone interface 1. Tap the keypad button on the Bluetooth HF Phone screen. 2. Enter the telephone number using the keypad. Pairing with the phone 1. Turn on both the N.I.C.E. 430 and your mobile phone. Backspace to change a number 2. Wait for the phone to pair with the N.I.C.E. 430 or tap Settings > Bluetooth icon > Pair mode.
Incoming history Delete current selection Clear all in current list English English Outgoing history Missed calls Page up Page down Go back Dial the selected number 2. Tap one of the buttons at the top of the screen to display incoming or outgoing calls and missed calls. Receiving a call After pairing, when a call comes in, the N.I.C.E. 430 rings and displays the Incoming Call screen.
English Clarion Corporation of America All Rights Reserved. Copyright © 2007: Clarion Corp. of America Printed in China 20 NICE430QuickReference.indd 20 N.I.C.E.
