User Guide

OWNER’S MANUAL/INSTALLATION GUIDE

OPERATING THE MSS430 SYSTEM

Reverse Mode (Control Station 1 ONLY)

When using this control station with an optional Rear

Vision Camera and CAA188 power supply, the camera’s

source will automatically switch when the car is put into

the reverse gear.

The LED indicator will flash designating the Reverse

Mode and the monitor will display the video signal from

the Rear Vision Camera.

NOTE: Rear Vision Camera Connections

a). The Rear Vision Camera’s video output from the

CAA188 must be connected directly to A/V Input 4

only. (see MSS430 Wiring for Rear Vision Camera on

page 8)

When the vehicle is taken out of the reverse gear, the last

video source chosen, before the reverse mode, is displayed

and the source LED is illuminated constantly.

Viewing A Videocassette

1. After system and individual control station power is on,

insert a videocassette in the VCR and press PLAY on the

corresponding IR Remote Control. Use the IR remote

controls to control the VCR functions through the moni-

tor’s IR Sensor.

2. At any Control Station, press the SOURCE SELECT but-

ton one or more times until the LED illuminates for the

VCR source input. Its TV monitor will now display the

source selected.

3. Adjust the headphones or audio system’s volume control

to a desired listening level.

Viewing A Video Game (If Installed)

1. After system and individual control station power is on,

power on the video game player and insert a desired

game cartridge.

2. At any Control Station, press the SOURCE SELECT but-

ton one or more times until the LED illuminated for the