User Guide

MS850 Installation Manual - Page 13
Two Car Operation
For added convenience, the remote transmitters included with the MS850 can be used to operate
a second Ungo system. Be sure that both systems are set to operate in Ungo Standard mode
If the Auxiliary Function is not being used, Button 2 may be programmed to operate the second
system as follows:
To use a single transmitter to operate multiple vehicles, the Transmitter can be set to arm Car #1
with Button 1 and arm Car #2 with the first available Button not being used by Car #1, which will
be Mode, Mode, 1 if Car #1 is using Auxiliary functions 1 through 3.
The Auxiliary functions for Car #2 will follow the arm/disarm button in sequential order.
As stated, the Programming and set-up functions of Car #2’s system
will not be affected by this
Transmitter configuration and will operate exactly as described described in this manual.
The Button Assignment of Arming and Disarming will not affect the operation of the Remote
during Programming, Sensor Test Mode, or any other system set-up function.
The Buttons used to control those features will remain as they are described in this manual,
regardless of how the Transmitter is set up to arm and disarm the system.
(A) = Car 1
(B) = Car 2
ARM / DISARM (A)
ARM / DISARM (B)
BUTTON 1
BUTTON 2
installation_850.qxd 9/10/99 6:26 PM Page 13