Installation manual

-2-
1. Ungo-Net Interface Introduction
This product is equipped with Ungo’s newest and most revolutionary technology
to date, the Ungo-Net bus system. The Ungo-Net bus has several advantages for
both the installer and consumer allowing system expansion and pain free
troubleshooting. All Ungo-Net equipped systems feature a special port that
interfaces directly with most Windows
®
based PCs (requires optional Ungo-Net
PCLINK). This port can be used to identify a faulty trigger input, double check the
installation, and change system parameters. In the diagnostic mode, it is able to
retrieve the last 8 trigger events. This is extremely useful in determining whether
the vehicle has a faulty pin switch or the sensitivity of the shock sensor is set too
high.
Pressing the Valet Switch and counting siren chirps will become a thing of the
past with Ungo-Net. Ungo-Net lets the installer custom tailor the security system
to the needs of the consumer. With the optional 2-way LCD transmitter and
receiver kit (part # FMKIT), the consumer will have the luxury of a LCD remote
transmitter. The LCD remote provides both audible and visual confirmation of
system functions using 2-way FM communication between the vehicle and the
transmitter. This communication can notify the owner of the status of the vehicle
(armed, disarmed, etc.), as well as any violation attempts. The 2-way
transmitter’s advanced FM design also provides longer, more consistent range
than a conventional AM transmitter.
For those individual's that need additional auxiliary outputs, an auxiliary channel
expander (part # AUX BOX) can be added to the unit, providing 7 additional
outputs to the system. Using the Ungo-Net PCLINK, the installer can designate
each auxiliary function as a momentary, latched, or timed output.
Ungo-Net Accessories
PCLINK: Includes Ungo-Net software, serial cable, instructions, and power
supply.
FMKIT: Includes SAA217T (FM transmitter), extended range antenna,
instructions, and FM receiver module.
AUX BOX: I ncludes receiver module, wiring harness, and instructions.
MS2106 install.qxd 6/25/2003 10:53 AM Page 2