Owner`s manual

iPod Operations
3. Turn the [ROTARY] knob to select the menu,
then press the
[~~] button. Select tracks by
repeating this operation.
Notes:
• The number of repeating operation is differ
depending to the selected menu.
•
To return to the previous list, press the [~~J
button. However, you cannot return to the menu of
the step 2. Perform the operation from the step 1
again.
CD Changer Operations
CD changer functions
When an optional CD changer is connected
through the CeNET cable, this unit controls all
CD changer functions. This unit can control a
total of 2 changers.
Press the
[SRC] button and select the CD
changer mode to start
play. If 2 CD changers
are connected, press the
[SRC] button to select
the CD changer for
play.
* If "NO MAG" appears in the display, insert the
magazine into the CD changer. "DISC
CHK"
appears in the display while the player loads
(checks) the magazine.
* If "NO DISC" appears in the display, eject the
magazine and insert discs into each slot. Then,
reinsert the magazine back into the CD changer.
Note:
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
Depending on the recording format, CD-ROM
discs may not play properly.
Pausing play
1. Press the [~II ] button to pause play. "PAUSE"
appears in the display.
2. To resume CD play, press the [~II ] button
again.
Selecting a CD
1. Press the [UP] or [ON] button to select the
desired disc.
* If a CD is not loaded in a slot of magazine,
pressing the [UP] or
[ON] button can not work.
Selecting a track
.Track-up
1. Press the [~~] button to move ahead to the
beginning of the next track.
2. Each time you press the [~~] button, the
track advances ahead to the beginning of the
next track.
• Track-down
1. Press the [ .... ~] button to move back to the
beginning of the current track.
2. Press the [~] button twice to move to the
beginning of the previous track.
M455A 27