Installation manual

Clarion/Hyperlink Bridge Kit Installation Manual Rev. A Page 19
Hyperlink Technologies, Inc.
MATERIAL LIST
• (2) Clarion M10II Radios
• (2) Clarion Power Supplies
• (2) AT-MC12T-16 Transceiver
• (2) AT-MC12T-16 Power Supplies
• (2) Cat 5 cables 7 feet with RJ45
• (2) Clarion Adapter Cables
• (2) Cables, 50 feet low-loss with integral lightning protection
• (2) 2.4 GHz HyperGain Antennas with mounting hardware
• (2) HyperAmps *
• (2) Power Injectors *
• (2) Antenna Mounting Hardware
• Sealant Tape
• Manual
OS requirements:
The Clarion radios are true transparent bridges so they will work with
all Operating Systems, protocols, IEEE 802.3 and Ethernet II
Tools:
7/16” open-end wrench or adjustable wrench
#12-10 AWG or similar wire (for grounding)
Wire Cutter / Stripper
Pliers
Other Helpful Equipment and Tools
Cellular telephones or Walkie-talkies
Binoculars
Compass
Handheld GPS
*Included with amplified HyperLink systems