Installation manual

Clarion/Hyperlink Bridge Kit Installation Manual Rev. A Page 17

Hyperlink Technologies, Inc.

M10II Specifications

Frequency Range: 2400-2483.5 MHz ISM band

Carrier Frequency: 2436.07 MHz

Modulation Type: Direct Sequence Spread Spectrum

Chip Modulation: BPSK, 32 Mcps

Processing Gain: 12dB (Nominal)

Communication Method: Half Duplex

Channel Access Method: SS-P-CSMA

Type of Interface: MAU (driven by AUI)

Datalink Interface: IEEE802.3 or Ethernet II MAC

Network Addressing: derived from attached NIC (Note-1)

RF MAC Protocol: Radio encapsulation of IEEE802.3

or Ethernet II MAC frame.

Network Topology: Peer to peer

Dimensions: 148mm(W) × 210mm(D) × 75mm(H)

Power Requirement: +6.2VDC @ 2.0A max.

Operating Temperature: 0 ~ +40 C

Storage Temperature: -20 ~ +60 C

Humidity: 0% ~ 90%

1. Note 1 M10II has its own MAC address for configuration of operating

parameters. M10II also memorizes single MAC address of attached Network

Interface Card(s) for re-transmission protocol.

Spread Spectrum p-persistent CSMA