User`s manual

CLARION M10 SERIES TESTING
M10 SERIES USER’S MANUAL PAGE 43
Figure 7.3.2
Hub
(if required)
Transceiver Cable
M10
10BaseT
Cable
10BaseT
Cable
Hub
(if required)
Transceiver Cable
LAN Analyzer-1
LAN Analyzer-2
Data Flow
Variable
Attenuator
RF Cable
7.3.3 MEASURING PROCEDURE OF THROUGHPUT
1. Setup as shown in Figure 7.3.2. The power sources of the M10s must
also be connected (not shown in the figure).
2. Power on the M10s
3. Initiate hubs and LAN analyzers.