User`s manual

CLARION M10 SERIES CONFIGURATION
M10 SERIES USER’S MANUAL PAGE 32
Parameters Possible Values Default Remarks
Antenna Selection 1/0 (External/Internal) FF
(= External
with
Diversity set
to OFF)
This parameter must be set to
‘External’ absolutely because
no internal antenna is provided
with JX-4000. Otherwise it
behaves similar to the FEC
mode where a 1 toggles the
antenna choice and a 0 leaves
the choice for a transmission
attempt.
RF Address Derived from attached NIC
Or set manually with CONFigRf
command.
RF address is used on RF
reception by the JX-4000
determine whether to send
ACK, and at the transmitter to
recognize its ACK. It is not
used if ‘Address Checking’ is
off.
Use default MAC ID MAC Address
(00606FXXXXXX)
or
Clarion Null Address
(00606F000000)
Null Address Upload address is used for
configuration and firmware
upgrade only. Each JX-4000 has
its own unique 12-hex-digit
MAC ID that is used as default
Upload Address. However, one
can select Clarion Null Address
‘00606F000000’ as Upload
Address for convenience.
ACK time-out 0xx6E to 0xxFE 0xx6E
(~330us)
Can be selected by steps for
various environments of
applications. The longer link
range requires the longer ACK
time-out. Three (3)
microsecond time resolution.