Owner’s manual HIGH-FIDELITY AM/FM CD PLAYER • • Clarion Co., Ltd. All Rights Reserved. Copyright © 2004: Clarion Co., Ltd. Printed in japan / / 2004/5 (Abe.
English Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this equipment. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ This manual includes the operating procedures of the CD changer and TV tuner connected via the CeNET cable. The CD changer and TV tuner have their own manuals, but no explanations for operating them are described. Contents 1. FEATURES ...........................................
Display Items Handling Compact Discs : Speaker indication : Disc indication : Scan indication : Repeat indication : Random indication 1. When the inside of the car is very cold and the player is used soon after switching on the heater moisture may form on the disc or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc, wipe it off with a soft cloth. If moisture forms on the optical parts of the player, do not use the player for about one hour.
/ 4. NOMENCLATURE Note: • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). Names of the Buttons and their Functions [ROTARY] [CD SLOT] [Q] [A M] [ROTARY] knob [BAND] button • Adjust the volume by turning the knob clockwise or counterclockwise. • Mute the sound. When the knob is pressed and held for 1 second or longer, the volume is changed from 1dB steps to 0.5dB steps.
English 5. REMOTE CONTROL Receiver for remote control unit Operating range: 30˚ in all directions Signal transmitter Remote control unit [SCN] [RPT] [FNC] [RDM] [BND] [ ],[ [DISC] [ ],[ ] [DISP] ] [ ] [ADJ] [ ],[ ] [A-M] [MUTE] [PS/AS] [ ], [ ] Inserting the Batteries 1. Turn the remote control over, and remove the rear cover with a sharp-pointed object while pressing in the direction of the arrow. 2. Insert batteries (CR2025) making sure that they face the directions shown in the figure.
English Functions of Remote Control Unit Buttons Mode Button Radio CD CD changer DVD changer [FNC] Switches among radio, CD, CD changer, DVD changer, TV and AUX. [BND] Switches reception band. Plays the first track. Top play. Moves the next disc in increasing order. TV Switches reception band. [ ],[ ] Increases and decreases volume (in all modes). [ ],[ ] Tunes in the desired station. Moves tracks up and down. When pressed and held for 1 second: Fast-forward/fast-backward.
Basic Operations Note:Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). CAUTION Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit.
Basic Operations English Turning on/off the display Adjusting the bass/treble You can turn the display ON/OFF by holding the [A-M] button down for at least one second. You can also turn the display ON by pressing the [DISP] button while the display is OFF. This function is used to set the tone in more detail for listening. • The tone can be adjusted when the Equalizer mode is set to "BASS/TREB". Adjusting the tone Press the [A-M] button and select the item to adjust.
Radio Operations Recalling a preset station 1. Press the [FUNC] button and select the radio mode. The frequency appears in the display. 2. Press the [BAND] button and select the radio band. Each time the button is pressed, the radio reception band changes in the following order: FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1... 3. Press the [A] or [D] button to tune in the desired station. A total of 24 preset positions (6-FM1, 6-FM2, 6FM3, 6-AM) exist to store individual radio stations in memory.
CD Operations English Loading a CD Displaying CD titles Insert a CD into the center of the CD SLOT with the labeled side facing up. “LOADING” appears in the display, the CD enters into the slot, and the play starts. This unit can display title data for CD-text CDs and user titles input with this unit. 1. Press the [DISP] button to display the title. 2.
CD Operations Random play ●Fast-forward Press and hold the [D] button for 1 second or longer. ●Fast-backward Press and hold the [A] button for 1 second or longer. The random play selects and plays individual tracks on a disc in no particular order. This function continues automatically until it is cancelled. 1. Press the [RDM] button. “RDM” lights in the display, an individual track is selected randomly and play begins. 2. To cancel the random play, press the [RDM] button again.
Operations Common to Each Mode English Setting the clock This unit displays the time when the car engine is running (ACC ON). The clock is displayed in 12-hour format. • When a navigation system is connected, the clock cannot be adjusted as clock data is sent from the navigation system. 1. Press the [ADJ] button. The previously adjusted item "CLOCK", for example, is displayed on the title display, and the mode changes to the Adjust mode. 2. Press the [ ] or [ ] button to select "CLOCK". 3.
Operations Common to Each Mode The filter can be adjusted for each speaker. For details, see "About filter settings" (page 18). 7. Press the [ ] button. 8. Press the [ ] or [ ] button to select the speaker adjustment item. Each press of the buttons switches the adjustment item. ∗ The filter can be adjusted when the Audio mode is the Standard mode or the Multi mode. 1. Press the [ADJ] button. 2. Press the [ ] or [ ] button to select "SOUND". 3. Press the [s] button. 4.
Operations Common to Each Mode English About the Standard mode and Multi mode These two modes can be used to make the following various sound adjustments for playing back music sources: • Setting of the filter (high-pass filter and low-pass filter) frequency for each speaker • Tone adjustment by P.
Operations Common to Each Mode Frequency band played back mainly by HIGH (2 kHz onwards) Frequency band played back mainly by MID (500 Hz to 2 kHz) Frequency band played back mainly by LOW (80 kHz to 500 Hz) Frequency band played back mainly by SUB-W (to 80 kHz) 80Hz 500Hz 2kHz The filter frequency ranges that can be set vary according to the speaker. The following table shows these ranges. Note, however, that the frequencies are selected from the value (1/3 octave steps) currently set on this unit.
Operations Common to Each Mode English In the Standard mode: About gain (G) This function allows you to adjust how much the output level is to be lowered. ●Characteristics during gain adjustment SUB-WOOFER LOW MID HIGH In the Multi mode: FRONT HIGH FRONT HIGH FRONT MID FRONT MID 0dB -24dB About phase (PHASE) The factory default setting is "NOR" (forward phase). Try switching between "NOR" (forward phase) and "REV" (reverse phase) and select the setting that sounds most natural to you.
Operations Common to Each Mode ∗ This can be adjusted when the Equalizer mode is set to "P.EQ". ∗ This can be adjusted when the Audio mode is the Standard mode or the Multi mode. 1. Press the [ADJ] button. 2. Press the [ ] or [ ] button to select "SOUND". 3. Press the [s] button. 7. Press the [s] button. The setting value blinks. 8. Press the [ ] or [ ] button to adjust the setting. 9. When you have finished the adjustment, press the [s] button to return to the screen in step 6.
Operations Common to Each Mode English ●About P.EQ adjustment The P.EQ menu contains the following adjustment items. • Selection of channel (LEFT/RIGHT) Select the channel (left or right) to be adjusted. • Selection of band (BAND) Select the frequency band (1 to 5) to be adjusted. • Selection of center frequency (fo) Select the frequency to be taken as the center frequency in frequency correction.
Operations Common to Each Mode Three groups of adjustment settings made to suit your car can be saved for both the Standard mode and Multi mode. ∗ P.EQ settings are not saved when the Equalizer mode is set to "BASS/TREB". 1. Press the [ADJ] button. 2. Press the [ ] or [ ] button to select "SOUND". 3. Press the [s] button. 4. Press the [ ] or [ ] button to select "MEMORY". 5. Press the [ ] button. 6. Press the [ ] or [ ] button to select "MEMORY1", "MEMORY2", "MEMORY3" or "DEFAULT".
Operations Common to Each Mode English Setting the input level for portable audio (AUX SENS) Setting the anti-theft indicator (BLINK LED) This unit is provided with two AUX input lines. The input level for third-party portable audio connected to each of these lines can be set. * The factory default setting is "MID". This function makes the indicator of Pch6 blink (red) when ACC is OFF to create a visual antitheft effect. * The factory default setting is "OFF". 1. Press the [ADJ] button. 2.
English 7. OPERATIONS OF ACCESSORIES CD Changer Operations CD changer functions Displaying CD titles When an optional CD changer is connected through the CeNET cable, this unit controls all CD changer functions. This unit can control a total of 2 changers. Press the [FUNC] button and select the CD changer mode to start play. If 2 CD changers are connected, press the [FUNC] button to select the CD changer for play. This unit can display title data for CD-text CDs and user titles input with this unit.
CD Changer Operations English Selecting a track Repeat play ●Track-up 1. Press the [D] button to move ahead to the beginning of the next track. 2. Each time you press the [D] button, the track advances ahead to the beginning of the next track. ●Track-down 1. Press the [A] button to move back to the beginning of the current track. 2. Press the [A] button twice to move to the beginning of the previous track. Repeat play continuously plays the current track.
TV Operations Manual tuning When an optional TV tuner is connected through the CeNET cable, this unit controls all TV tuner functions. To watch a TV, a TV tuner and a monitor are required. There are 2 ways available: Quick tuning and step tuning. When you are in the step tuning mode, the frequency changes one step at a time. In the quick tuning mode, you can quickly tune the desired frequency. 1. Press the [BAND] button and select the desired band (TV1 or TV2). Watching a TV 1.
TV Operations English Auto store Setting the TV area Auto store selects 6 TV stations automatically and stores each one into preset memory. If there are not 6 stations with good reception, stations previously stored in memory remain and only the strong stations are stored into memory. 1. Press the [BAND] button and select the desired TV band (TV1 or TV2). 2. Press and hold the [P/A] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels.
Problem Power does not turn on. (No sound is produced.) Cause English 8. IN CASE OF DIFFICULTY Measure Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. Power antenna lead is short- 1. Turn the unit off. ed to ground or excessive 2. Remove all wires attached to the power current is required for reantenna lead.
If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. Error Display Measure Cause ERROR 2 A CD is caught inside the CD deck and is not ejected. This is a failure of CD deck’s mechanism. Consult your store of purchase. ERROR 3 A CD cannot be played due to scratches, etc. Replace with a non-scratched, non-warped-disc. ERROR 2 A CD inside the CD changer is not loaded. This is a failure of CD changer’s mechanism.
Audio Bass Control Action (50 Hz): ±12 dB Treble Control Action (10 kHz): ±12 dB Line Output Level (CD 1 kHz): Vol 0dB = 4V Vol +6dB = 8V (Max) DSP/DAC • A/D conversion: 24-bit 64x oversampling ∆Σ A/D converter • D/A conversion: 96 kHz/24-bit advanced segment D/A converter • 8x oversampling digital filter: Blocked band attenuation: -130 dB Transmitted band attenuation: ±0.00001 dB • Sampling rate converter: Input sampling rate (fs32k, fs44.
English APPENDIX : TIME ALIGNMENT LIST The list below shows values obtained by calculating the 1STEP delay with 1STEP distance set to 0.715625cm and rounding the resulting figures to the nearest whole number. 1STEP delay : 0.020833333[msec] Velocity of sound v=331.5+0.6∗T T=20°C v =343.5[m/s] 1cm=0.029112082[msec] 1STEP distance=0.715625[cm] STEP Distance Time [cm] [msec] 0 0.0 0.00 1 0.7 0.02 2 1.4 0.04 3 2.1 0.06 4 2.9 0.08 5 3.6 0.10 6 4.3 0.13 7 5.0 0.15 8 5.7 0.17 9 6.4 0.19 10 7.2 0.21 11 7.9 0.
330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 236.2 236.9 237.6 238.3 239.0 239.7 240.5 241.2 241.9 242.6 243.3 244.0 244.7 245.5 246.2 246.9 247.6 248.3 249.0 249.8 250.5 251.2 251.9 252.6 253.3 254.0 254.8 255.5 256.2 256.9 257.6 258.
Standard Mode MEMORY1 HPF FRONT-HIGH LPF FILTER FRONT-LOW REAR HPF LPF SUB-W HPF FRONT-HIGH TIME Alignment FRONT-LOW REAR SUB-W Filter frequency(fc) Slope Gain Phase Filter frequency(fc) Slope Gain Phase Filter frequency(fc) Slope Gain Phase Filter frequency(fc) Slope Filter frequency(fc) Slope Gain Phase BAND1 BAND2 LEFT BAND3 BAND4 BAND5 BAND1 BAND2 RIGHT BAND3 BAND4 BAND5 34 HX-D2 MEMORY2 MEMORY3 Hz dB/oct dB NOR/REV NOR/REV NOR/REV Hz dB/oct dB NOR/REV NOR/REV NOR/REV Hz
Multi Mode HPF HIGH LPF X-OVER MID HPF LPF LOW HPF LPF SUB-W HPF HIGH MID TIME Alignment LOW SUB-W BAND2 P.
