Manualshelf

Owner`s manual

ManualsBrandsClarion Manualscar media receiversFZ709
31323334353637383940
32
English
FZ709
Bluetooth
®
Operations
PASS KEY
User can set new 4 digits of pass key that range
from 0 to 9 for pairing authentication security.
This new pass key will be used for subsequent
pairing mode with other
Bluetooth
®
device.
∗
The factory default setting is “1234”.
1 - 1 .
Select “PASS KEY”.
1 - 2 .
Touch the
[
]
key to enter detail setting
stage.
1 - 3 .
Default pass key is displayed. Touch
[
ENT
]
key to change the setting.
1 - 4 .
Touch
[
]
or
[
]
key to move the cursor.
1 - 5 .
Slide along
[
]
slider or touch
[
]
/
[
]
key to select the desired digits.
1 - 6 .
Touch
[
ENT
]
key for 2 seconds to store in
memory.
1 - 7 .
“MEMORY” is displayed.
Note:
Both
Bluetooth
®
device and this unit must have the
same pass key in order for pairing to be success
-
ful.
ADDRESS
This will hold the unique
Bluetooth
®
address. The
address is 12 figures.
1 - 1 .
Select “ADDRESS”.
1 - 2 .
Touch the
[
]
key, the
Bluetooth
®
address
appears in the display.
VERSION
This will display the software version of the
Bluetooth
®
.
1 - 1 .
Select “VERSION”.
1 - 2 .
Touch the
[
]
key, the
Bluetooth
®
version
appears in the display.
BT NAME
This will hold the unit's name for pairing pur-
pose.
1 - 1 .
Select “BT NAME”.
1 - 2 .
Touch the
[
]
key, the unit's name appears
in the display.
ON
Automatic connection is enabled.
OFF
Automatic connection is disabled.
Note:
If user disconnect the device from this unit, the unit
will not try to connect to the device automatically
even if the “AUTO CONNECT” is set to “ON”.
AUTO CONNECT
This function allows this unit to be connected au-
tomatically with previously connected device.
∗
The factory default setting is “OFF”.
1 - 1 .
Select “AUTO CONNECT”.
1 - 2 .
Touch the
[
]
key to enter detail setting
stage.
1 - 3 .
Slide along
[
]
slider or touch
[
]
/
[
]
key to select “ON” or “OFF”.
AUTO ANSWER
This is a setting to determine whether any in-
coming call will be automatically or manually
answered.
∗
The factory default setting is “OFF”.
1 - 1 .
Select “AUTO ANSWER”.
1 - 2 .
Touch the
[
]
key to enter detail setting
stage.
1 - 3 .
Slide along
[
]
slider or touch
[
]
/
[
]
key to select “ON” or “OFF”.
ON
Any incoming call is automatically answered
in 5 seconds.
OFF
User needs to manually answer the call.
Downloaded from Caradio-Manual.com Manuals