Owner`s manual

31
English
FZ709
ADD PHONEBOOK
This option is used to add contacts from the mo-
bile phone.
1 - 1 .
Select “ADD PHONEBOOK”.
1 - 2 .
Touch the
[
ENT
]
key to enter standby mode,
“STAND BY” is blinking.
1 - 3 .
During standby mode, use the last connected
mobile phone to send contacts to the unit.
Notes:
When the “COMPLETED” appears, add phone
book is succeed.
Total contacts that can be stored depend on the
selected Book Type.
Bluetooth
®
Operations
DELETE PHONEBOOK
This is a setting for user to delete one or the en-
tire phone numbers.
1 - 1 .
Select “DEL PHONEBOOK”.
1 - 2 .
Touch the
[ ]
key, the current connected
phone is displayed.
1 - 3 .
Touch the
[
ENT
]
key to enter selection
mode.
1 - 4 .
Slide along
[ ]
slider or touch
[ ]
/
[ ]
key to select “ALL DELETE” or “1 DELETE”
and touch
[
ENT
]
key.
1 - 5 .
When you select “ALL DELETE”, touch the
[
ENT
]
key to proceed.
1 - 6 .
When you select “1 DELETE”, slide along
[ ]
slider or touch
[ ]
/
[ ]
key to select
one of the desired phone number and touch
[
ENT
]
key.
1 - 7 .
Touch the
[
ENT
]
key for 2 seconds to de
-
lete.
DELETE HISTORY
This option used to delete the call history.
1 - 1 .
Select “DEL HISTORY”.
1 - 2 .
Touch the
[ ]
key, “DELETE?” is dis
-
played.
1 - 3 .
Touch the
[
ENT
]
key for 2 seconds to de
-
lete.
BOOK TYPE
The unit provides 3 types of phone book which
are stored in memory.
∗
The factory default setting is “TYPE 3”.
1 - 1 .
Select “BOOK TYPE”.
1 - 2 .
Touch the
[ ]
key to enter detail setting
stage.
1 - 3 .
Slide along
[ ]
slider or touch
[ ]
/
[ ]
key
to select the setting in sequence “
TYPE1”,
“TYPE 2” or “TYPE 3”.
1 - 4 .
“ALL MEMORY IS DELETED” is dis-
played.
1 - 5 .
Touch
[
ENT
]
key for 2 seconds to change
setting.
TYPE
PHONE
MEMORY 1
MEMORY 2
MEMORY 3
MEMORY 4
MEMORY 5
1 2 3
250 pieces 200 pieces 100 pieces
250 pieces 100 pieces 100 pieces
0 piece 100 pieces 100 pieces
0 piece 50 pieces 100 pieces
0 piece 50 pieces 100 pieces
Note:
Once setting is changed, all previous stored phone
-
book data will be cleared.
RING VOL
This option is used to change the ringing volume
by each paired mobile phone device.
∗
The factory default setting is 5.
(
Adjustment level: 1 to 10
)
1 - 1 .
Select “RING VOL”.
1 - 2 .
Touch the
[ ]
key to enter detail setting
stage.
1 - 3 .
Slide along
[ ]
slider or touch
[ ]
/
[ ]
key to change the ringing volume.
Downloaded from Caradio-Manual.com Manuals