Owner’s manual Mode d’emploi Istruzioni per l’uso Bluetooth® USB/MP3/WMA/AAC RECEIVER / CeNET CONTROL Bluetooth® RÉCEPTEUR USB/MP3/WMA/AAC / CONTRÔLE CeNET Bluetooth® RECEPTOR USB/MP3/WMA/AAC / CONTROL CeNET Downloaded from Caradio-Manual.
English English CLARION PRODUCT REGISTRATION INFORMATION For USA and Canada only Dear Customer: Congratulations on your purchase of a Clarion mobile electronic products. We are confident that you’ll enjoy your Clarion experience. Français There are many benefits to registering your product. We invite you to visit our website at www.clarion.com to register your Clarion product. We have made product registration simple with our easy to use website. The registration form is short and easy to complete.
English Contents 1. FEATURES ..................................................................................................................................... 3 2. PRECAUTIONS .............................................................................................................................. 4 3. CONTROLS .................................................................................................................................... 5 MAIN UNIT ............................................
2. PRECAUTIONS This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
English 3. CONTROLS/ LES COMMANDES/ CONTROLLI Français MAIN UNIT / APPAREIL PRINCIPAL / APPARECCHIO PRINCIPALE Español Vue de l’appareil Pilote Par Dessous Vista Inferior de la Unidad Fuente Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter. Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre. Nota: Assicurarsi di aprire questa pagina e fare riferimento a questi diagrammi quando si legge ciascun capitolo.
English 4. NOMENCLATURE Note: Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5. Names of the Keys and Their Functions [ ] key ] key to power on the unit. Touch the [ Touch and hold the key for 1 second or longer to turn off the power. Switch to Source menu. [ ] key Recall ISR radio station in memory. Touch and hold the key for 2 seconds or longer: Store current station into ISR memory (Radio mode only). [ ] key Switch to ADJ menu.
English Slider’s Key Operation Slide Touch & hold slider [ ] will increase volume continuosly. Touch & hold [ ] will to scroll up items continuosly. Touch and release [ ] once will increase the volume 1 step. Touch and release [ ] once will scroll up items 1 step. Touch & hold slider [ ] will decrease volume continuosly. Touch & hold [ ] will to scroll down items continuosly. Touch and release [ ] once will decrease the volume 1 step. Touch and release [ ] once will scroll down items 1 step.
English Display Items Title display Trick Play indication USB Scan play Repeat play Random play All scan play All repeat play All random play iPod Repeat/Random play Repeat/All Random play Random play All Random play Band/Preset no. Radio mode Satellite mode Band/Channel no. Mode name/Folder no./ USB mode Track no./Playback time Mode name/Track no.
English 5. REMOTE CONTROL Inserting the Battery 1. Turn over the remote control unit and slide the cover in the direction indicated by the arrow in the illustration. 2. Insert the battery (CR2025) into the insertion guides, with the printed side (+) facing upwards. 3. Press the battery in the direction indicated by the arrow so that it slides into the compartment. 4. Replace the cover and slide in until it clicks into place.
English Functions of Remote Control Unit Buttons Mode Button Radio/Satellite USB iPod BT Audio [SRC] Press the button to power on. Press and hold the button for 1 second or longer: Power off. Switch among radio, Satellite radio receiver, USB, BT Audio, AUX and iPod. [BND] Switch reception band. [ ],[ ] [ [MUTE] [ISR] [DISP] No function. down. Move tracks up and down. Press and hold the button for 1 second or longer: Fast-forward/fast-backward. Move tracks up and down. No function.
Basic Operations Note: Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5. ! CAUTION Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit. Please operate this unit by the finger. It is not possible to operate it normally with gloves worn.
English Basic Operations ∗ Once selected, the preferred title display becomes the display default. When a function adjustment such as volume is made, the screen will momentarily switch to that function’s display, then revert back to the preferred title display several seconds after the adjustment. ∗ If the key operation is performed with the screen saver function on, the operation display corresponding to the key operation is shown for about 30 seconds and the display returns to the screen saver display.
English Basic Operations When “BASS BOOST”/“IMPACT”/ “EXCITE” is set: “BASS BOOST”/“IMPACT”/“EXCITE” will appear after the “BEAT EQ” item in the sound Adjustment mode. 3 - 3 - 1 . Select the item and touch [ ] key to enter detail setting stage. 3 - 3 - 2 . Slide along [ ] slider or touch [ ]/[ ] key to adjust the setting in the range of -3 to +3. ∗ The factory default setting is “0”. 3-3-3. After completing settings, touch the [ENT] key to return to the 1st selected item. When “CUSTOM” is set: 3-3-1.
English Basic Operations 3-5. After completing settings, touch the [ENT] key to return to the 1st selected item. 3-5. Setting the BBE MP (Sound Enhancement and Restoration for compressed audio files) Adjusting the treble This adjustment can be performed only when the BEAT EQ is set to “CUSTOM”. 3 - 1 . Select “TREBLE”. 3 - 2 . Touch [ ] key to enter detail setting stage. ]/[ ] key to select Gain(“G”), Touch [ center frequency(“F”) or Q factor(“Q”). 3 - 4 .
When “ON” is set: 3-3-1. 3-3-2. Touch [ ] key to enter detail setting stage. ] slider or touch [ ]/[ ] Slide along [ key to select the value in sequence of “HIGH” “MID” “LOW” ∗ The factory default setting is “MID”. 3-4. Adjusting the high pass filter Select “HPF”. Touch [ ] key to enter detail setting stage. 3 - 3 . Slide along [ ] slider or touch [ ]/[ ] key to select the setting in sequence “60” “90” “120” “THROUGH” 3-1. 3-2. ∗ The factory default setting is “THROUGH”.
English Radio Mode Operations Listening to the radio ] key to switch to Source menu. 1. Touch the [ 2. Select “TUNER” to enter Radio mode. 3. To select a preset band, touch the [ ] key and then select one of the preset bands such as FM1, FM2, FM3 or AM1. Every time the [ ] key is touched, the band switches in the following order: FM1 FM2 FM3 AM1 FM1... 4. Touch the [ ]/[ ] key to tune in the desired station. Tuning There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning.
Preset scan Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory. 3 - 1 . Select “PRESET SCAN”. 3 - 2 . Touch [ENT] key to start scan preset channel. 3 - 3 . When a desired station is tuned in, touch the [ ] / [ ] key to continue receiving that station. Auto store Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially.
English USB Operations USB memory device operation About USB memory USB is an acronym for Universal Serial Bus, and refers to an external bus standard supporting data transfer rates of 12 Mbps. This unit is compatible with USB 1.1/2.0 with maximum data transfer rates of 12 Mbps. USB memory devices that can be played by connecting to the unit’s USB cable are limited to those recognized as “USB mass storage class devices”; operation is not guaranteed with all USB memory devices.
What is AAC? AAC is an acronym for “Advanced Audio Coding” and refers to the audio compression method used with video compression standards MPEG-2 and MPEG-4. AAC files composed with the following conditions can be played: AAC files encoded with iTunes. iTunes Ver. 7.0 or earlier. File extension “.m4a” (“.M4A”) Tracks purchased at an iTunes Store, and copyright-protected files cannot be played. When playing AAC files that include image data, additional time may be required before playback begins.
English USB Operations Connecting a USB memory device 1. Connect the USB memory device to the USB slot. Playback will begin from the first file recorded on the device. ] ∗ If the device is not recognized, touch the [ key to switch to the Source menu and select the source to the device. ∗ Always insert the device fully into the connector. Incomplete connections may cause the device not to be recognized.
Other various play functions USB OPTION ] key to 1 . During USB mode, touch the [ switch to ADJ menu. 2 . Select “OPTION” in the menu to enter USB Option mode. ] slider or touch [ ]/[ ] 3 . Slide along [ key, the USB Option mode changed as following order: “SCAN” “REPEAT” “RANDOM” “SCAN”... Note: During trick play, “TRICK OFF” will be appeared before “SCAN” item. Scan play This function allows you to locate and play the first 10 seconds of all the tracks in current folder. 3 - 1 . Select “SCAN”. 3 - 2 .
English USB Operations To cancel trick play Select “TRICK OFF”. 3 - 2 . Touch [ENT] key to cancel trick play. 3 - 3 . Display will return to playback display. 3-1. Folder Select This function allows you to select a folder containing MP3/WMA/AAC files and start playing from the first track in the folder. ] slider or touch [ ]/[ ] 1. Slide along [ key. Touch [ ] key to move the next folder. Touch [ ] key to move the previous folder. ∗ Touch [ ] key while in the final folder will shift to the first folder.
Note: The following operations in Play mode operate the same as in USB mode: ∗ Track selection: [ ] , [ ] ∗ Fast-forward/fast-backward: [ ] , [ ] ] ∗ Pause: [ See “USB Operations” (page 18) for details. Other various play functions (in Play mode) Notes: These functions are not supported when in the iPod menu. The Random function set on the iPod remains the same after attachment/detachment of the iPod. The Repeat function on the iPod will be changed when you connect/disconnect the iPod to the unit.
English iPod Operations Selecting category from the iPod music menu 1. Touch and hold the [ ] key for 1 second or longer. 2. Select to switch to music menu or video menu. 3. If “MUSIC” is selected from the list, iPod music menu categories will be displayed. Notes: If the iPod does not support video, the iPod music menu categories will be displayed directly. Repeat and Random mode operations are not supported when in the iPod menu.
About title display This unit supports the display of title information transmitted from a connected iPod. Character code information is UTF-8; displayable characters include English alphanumerics, some symbols, and some umlaut characters. Unsupported characters will be replaced by asterisks (∗). Select Simple Control mode This function is to select the mode to operate the iPod contents. ∗ The factory default setting is “OFF”. Select “SIMPLE MODE”. Touch [ ] key to enter detail setting stage. 3 - 3 .
English Satellite Radio Operations This function is available when a Satellite Radio Tuner is connected. This unit can control the following Satellite Radio Tuner through the CeNET Translator Adapter.
This allows you to store your favorite satellite radio stations in memory for later recall. There are 2 methods to recall a preset station. Method 1: 3 - 1 . Select “P.CH MEMORY”. 3 - 2 . Touch [ ] key to enter detail setting stage. 3 - 3 . Slide along [ ] slider or touch [ ]/[ ] key to select the desired preset station. 3 - 4 . Touch [ENT] key for less than 1 second to recall the stored radio frequency. Method 2: 1 . Touch the [ ] key to select the desired band. 2 .
English Satellite Radio Operations Scan function There are two scan modes: the category scan mode and the preset scan mode. During scanning channels are displayed in abbreviated form, the display mode cannot be switched. Preset scan (PRESET SCAN) A preset scan scans the channels (up to 18 channels) stored in the preset memory about every 10 seconds. 3 - 1 . Select “PRESET SCAN”. 3 - 2 . Touch [ENT] to start scan preset channel. 3 - 3 .
Select “PHONE BOOK”. ] key to enter the contact name Touch the [ ] slider mode (In this case, slide along [ or touch [ ]/[ ] key to select the desired contact name). 1 - 3 . When the contact name is displayed, touch the [ ] key to view details. 1 - 4 . When contact name or contact details is displayed, touch the [ENT] key to call the mobile phone number. Select “DIAL NUMBER”. Touch the [ ] key to enter the dial mode. 1 - 3 . Touch the [ ] or [ ] key to move the cursor. 1 - 4 .
English Bluetooth® Operations BT OPTION 1 . During BT mode, touch the [ ] key to switch to ADJ menu. 2 . Select “OPTION” in the menu to enter the BT OPTION mode. ] slider or touch [ ]/ 3 . Slide along the [ [ ] key, the BT OPTION mode changed as following order: “PAIRING” “DELETE” “PASS KEY” “ADDRESS” “BT NAME” “VERSION” “PAIRING”... PAIRING This option is used to perform Bluetooth® pairing with the mobile phone and audio. Up to a maximum of 5 mobile phones and an audio device can be paired. 1 - 1 .
ADD PHONEBOOK This option is used to add contacts from the mobile phone. 1 - 1 . Select “ADD PHONEBOOK”. 1 - 2 . Touch the [ENT] key to enter standby mode, “STAND BY” is blinking. 1 - 3 . During standby mode, use the last connected mobile phone to send contacts to the unit. Notes: When the “COMPLETED” appears, add phone book is succeed. Total contacts that can be stored depend on the selected Book Type. DELETE PHONEBOOK This is a setting for user to delete one or the entire phone numbers. 1 - 1 .
English Bluetooth® Operations AUTO ANSWER This is a setting to determine whether any incoming call will be automatically or manually answered. ∗ The factory default setting is “OFF”. Select “AUTO ANSWER”. Touch the [ ] key to enter detail setting stage. 1 - 3 . Slide along [ ] slider or touch [ ]/[ ] key to select “ON” or “OFF”. 1-1. 1-2. ON Any incoming call is automatically answered in 5 seconds. OFF User needs to manually answer the call.
Security code This unit can deter theft by checking registered security code if security code is registered. The security code is registered in the Adjustment mode “CODE” item. For first time installation, no security code is required. If security code is registered, changing or disconnecting the vehicle battery will cause the security code input to be requested for activation. “INPUT 0000” will be displayed and “0000” is blinking. Adjustment Mode 1. Touch the [ ] key to switch to ADJ menu. 2.
English Common Operations Notes: If both the dimmer and the car’s illumination are turned on, “ILLUMI ON” and the adjustment value will be displayed. If the dimmer is turned on and the car’s illumination is turned off, “ILLUMI OFF” and the adjustment value will be displayed. If the dimmer is turned off, only the adjustment value will be displayed. The display brightness level setting during dimmer and car’s illumination are turned on has independent adjustment value.
3-5. During finish adjustment, touch [ENT] key for 2 seconds to confirm. English Common Operations Setting the method for title scroll Set how to scroll in MP3/WMA/AAC title. ∗ The factory default setting is “ON”. Select “AUTO SCROLL”. Touch [ ] key to enter detail setting stage. 3 - 3 . Slide along [ ] slider or touch [ ]/[ ] key to select “ON” or “OFF”. 3-1. 3-2. 3-6. If successfully delete the registered code, “DELETED” will be displayed for 2 seconds and back to 1st item.
English Common Operations Setting the external amplifier When an external amplifier is used, the noise can be decreased by turning off the power supply of the internal amplifier. ∗ The factory default setting is “OFF”. Select “AMP CANCEL”. Touch [ ] key to enter detail setting stage. 3 - 3 . Slide along [ ] slider or touch [ ]/[ ] key to select “ON” or “OFF”. 3-1. 3-2. ON Use with connected AMP. OFF Use for inside AMP.
Problem Replace with a fuse of the same amperage. If the fuse blows again, consult your nearest service dealers. Incorrect wiring. Consult your nearest service dealers. No sound output when operating the unit with a m p l i fi e r s o r p o w e r antenna attached. Power antenna lead is shorted to ground or excessive current is required for remote-on the amplifiers or power antenna. 1. Turn the unit off. 2. Remove all wires attached to the power antenna lead.
Problem BT Audio English TROUBLESHOOTING Cause Measure Audio streaming is disconnected after telephone interrupt. This is probably happen when audio streaming and telephone function are from the same device (mobile phone). Dependent on phones. Reconnect A2DP/AVRCP ( Audio streaming profiles) from the phone again after telephone interrupt. Cannot perform remote control for audio streaming. AVRCP is not connected. Disconnect and pair the device again.
Problem After pairing, car stereo is not able to receive and make calls. Cause Bluetooth ® connection is not established yet. Normally it will take several seconds to establish the connection after pairing. Some phones will not automatic connect after pairing. Measure Use your phone to manually connect or select from the unit. English TROUBLESHOOTING Power off and on the car stereo and perform pairing again.
Error Display USB/iPod English 8. ERROR DISPLAYS Cause Measure ERROR 2 The files are not proper MP3/WMA/ AAC format. Use only properly encoded MP3/ WMA/AAC files. ERROR 3 (USB mode) The MP3/WMA/AAC files are improperly encoded. Use only properly encoded MP3/ WMA/AAC files. The iPod contains no audio files. Insert an iPod containing audio files. Over current detection. Disconnect the devices and reconnect. If the devices are still not recognized, try replacing with a different devices.
FM tuner Folder Level Limit: 8 Level Usable Sensitivity: 11 dBf File Support: 255 per folder Frequency Range: 87.9 MHz to 107.9 MHz 50 dB Quieting Sensitivity: 17 dBf Alternate Channel Selectivity: 60 dB Stereo Separation (1 kHz): 30 dB Frequency Response (±3 dB): 30 Hz to 15 kHz AM tuner Frequency Range: AM 530 kHz to 1710 kHz Usable Sensitivity: 28µV USB USB 1.1 and 2.0 compatible with a maximum transfer rates of up to 12Mbps. (Full speed) MP3 Decode Format MPEG 1, 2 and 2.
English SPECIFICATIONS Notes: Specifications comply with JEITA Standards. Specifications and design are subject to change without notice for further improvement. Please make sure when connecting external power amplifier, that you properly, to the car chassis, ground the amplifier. If this is not done, severe damage to the source unit may happen. Power Output: 18 W RMS x 4 Channels at 4 Ω and 1% THD+N Signal to Noise Ratio: 87 dBA (reference: 1 W into 4Ω) from Caradio-Manual.
Clarion Co., Ltd. All Rights Reserved. Copyright © 2009: Clarion Co., Ltd. Printed in Malaysia / Imprimé en Malaisie / Stampato in Malaysia Downloaded from Caradio-Manual.
