Owner's Manual

TROUBLESHOOTING
After pairing, car stereo Bluetooth" connection is not
Use your phone to manually connect
is not able to receive and
established yet. or select from the unit.
make calls.
Normally it will take several seconds
to establish the connection after
Power off and on the car stereo
pairing.
and perform pairing again. Always
make sure pairing information on
Some phones will not automatic
both device and main unit have
connect after pairing.
been deleted before starting a new
pairing activity.
If the problem persists, please visit
www.clarion.com for your phone
compatibility.
Car stereo is connected to other Disconnect the previous device and
device.
reconnect current device.
Unable to reconnect to The device pairing information may
Perform the above measure.
Q)
car stereo using phone.
have been deleted from the unit.
e:
0
..c:
There is no sound output Incoming call was answered too
Please use your phone to transfer
Q.
Q)
when incoming call is
quickly before you hear the ringing
the audio back to the phone for the
;!
answered. tone. This can cause the audio not
current ongoing call.
properly transferred to the main unit
Kindly answer the call only when you
by some phones.
hear a ringing tone next time.
If the problem persists, please
reconnect the phone or create new
pairing before the next incoming
call.
There is no sound output Bluetooth® communication link is
Please disconnect the phone and
during conversation.
lost. reconnect.
If the problem persists, please
create new pairing for both phone
and main unit.
Cannot operate the No response from mobile phone.
Turn off and on the mobile phone.
handsfree function
properly.
FZl09 39