Owner's Manual

TROUBLESHOOTING
Audio streaming is
disconnected after
telephone interrupt.
This is probably happen when audio
streaming and telephone function
are from the same device (mobile
phone).
Dependent on phones.
Reconnect A2DP/AVRCP (Audio
streaming profiles) from the phone
again after telephone interrupt.
Cannot perform remote
control for audio
streaming.
AVRCP is not connected.
Disconnect and pair the device
again.
Check whether both device and main
unit are
in play status. Change the
status
in the device if necessary.
If problem persists, please power off
and on the main unit or the device.
If your phone is facing this problem,
please do not use your phone while
audio streaming.
The external audio device may
in
Pause status.
Some Bluetooth" audio devices
might not support AVRCP.
Due to excessive BJuetooth' activity
on a
low bandwidth link. Some
phones will not handle this well.
Audio streaming will begin
to pulse on/off when using
your connected phone.
Display is showing device
name connected but there
is
no sound output.
.2
"C
::JI----------+--------------I---------------I
«
l-
cc
There might be connection links
broken between the devices.
Please delete pairing information
on both device and main unit and
start re-pairing.
The device might not support audio
streaming.
Please check your phone whether it
supports
Bluetooth" audio streaming
or visit www.clarion.com for your
phone compatibility.
* Advanced Audio Distribution Profile (A2DP) is used for Bluetooth"' audio streaming support.
* Audio Video Remote Control Profile (AVRCP) is used for controlling audio streaming playback.
38 FZl09