Owner's Manual
Table Of Contents
Bluetooth'!J
Operations
• AUTO ANSWER
This is a setting to determine whether any in-
coming call will be automatically or manually
answered.
*'
The
factory default setting
is
"OFF".
G-CD.
Select "AUTO ANSWER".
8-@. Touch the
[>]
key to enter detail setting
stage.
1\
G-®.
Slide along [
S~RL]
slider or touch
[A]/[V]
key to select "ON" or "OFF".
• ON
Any incoming call is automatically answered
in
5 seconds.
•
OFF
User needs to manually answer the call.
• AUTO CONNECT
This function allows this unit to be connected au-
tomatically with previously connected device.
*
The
factory default setting is "OFF".
O-CD
Select "AUTO CONNECT'.
0-<2). Touch the
[>]
key to enter detail setting
stage.
1\
o-®
Slide along [
S~L
] slider or touch
[A
]/[
V ]
key to select "ON" or "OFF".
• ON
Automatic connection is enabled.
•
OFF
Automatic connection is disabled.
Note:
• If user disconnect
the
device
from
this unit,
the
unit
will
not
try
to
connect
to
the device automatically
even
if
the "AUTO CONNECT"
is
set
to
"ON".
• PASS KEY
User can set new 4 digits of pass key that range
from 0 to 9 for pairing authentication security.
This new pass key will be used for subsequent
pairing mode with other
BJuetooth"
device.
*'
The
factory default setting is "1234".
G-CD.
Select "PASS KEY".
G-®.
Touch the
[>]
key to enter detail setting
stage.
G-® Default pass key is displayed. Touch [ENT]
key to change the setting.
O-@
Touch
[<]
or
[>]
key to move the cursor.
1\
O-@.
Slide along [
seRL
] slider or touch [
/\
]/[
V]
key to select
thl3
desired digits.
O-@
Touch [ENT] key for 2 seconds to store
in
memory.
0-(1). "MEMORY" is displayed.
Note:
•
Both
BJuetooth~
device
and
this unit must
have
the
same
pass
key
in
order
for
pairing to
be
success-
ful.
• ADDRESS
This will hold the unique
BJuetooth"
address. The
address is
12
figures.
G-CD.
Select "ADDRESS".
O-®.
Touch the
[>]
key,
the
BJuetoom'"
address
appears
in
the display.
• BT NAME
This will hold the unit's name for pairing pur-
pose.
G-CD
Select
"BT
NAME".
O-® Touch the [>]
key,
the unit's name appears
in
the display.
• VERSION
This will display the software version of the
BJuetooth®.
O-CD
Select "VERSION".
G-®.
Touch the
[>]
key,
the
BJuetooth'~
version
appears
in
the display.
32 FZ709