Owner`s manual

After connecting your iPod to the EA 1276, the iPod
display will change to the following:
iPod ~
clarion
OK to disconnect
Disconnecting
The iPod automatically switches "on" after
connecting to EA1276, and its battery is charged
as long as it stays connected with the vehicle
ignition key turned to ACC or ON.
To switch off the iPod manually, disconnect from
EA1276 adaptor.
To start iPod operations, change the main
unit mode to iPod mode. Playback will
start
automatically from the last position of the iPod.
The display changes from:
CONNECT --7 Start Playing
It will display current track and total tracks available
in the current category.
If the iPod is not connected, the main unit will
display "No iPod".
The main unit
is unable to detect the presence of
iPod if the battery of the iPod
is dead.
If vehicle ignition is turned to ACC off, playback
is paused, and iPod will go to power off within a
few minutes.
Playback
The iPod buttons are disabled and the display
is locked while it is connected to EA1276. All
operations of the iPod are controlled from the
main unit. Some iPod operations and features
will be unavailable. Please read this manual to
understand your supported iPod features.
For playback operations, please refer to the main
unit operations.
Default playback setting
By default, the playback setting will be:
• Start to play from the last position of track before
iPod
is being connected.
• Shuffle (Random) On/Off will follow iPod setting
• All Repeat On
6
While the iPod is connected, the main unit will
display current track number and total tracks
in
current category by default.
Playback position and setting
Playback position and setting will remain the same
as long as the iPod stays connected to EA1276.
If the iPod
is disconnected, playback position will
remain the same position before disconnection.