Owner`s manual
Operations Common
to
Each Mode
I
Anti-theft
indicator
The
red Anti-theft
indicator
is a function for pre-
venting theft.
When
the
OCP
is
removed
from
the
unit, this indicator blinks.
" The factory default setting is "OFF'.
1.
Press and hold
the
[T]
button
for 1 second
or
longer
to
switch
to
the
adjustment
selection
display.
2. Press
the
[<
..
]
or
[~>]
button
and
select
"BLINK
LED".
3. Turn the [ROTARY] knob clockwise to set
this function "ON"
or
turn it counterclockwise
to switch this function
"OFF'.
4. Press
the
[T] button
to
return to the previous
mode.
Setting the Subwoofer
" The factory default setting is
"SUB-W
ON".
1.
Press
and
hold
the
[T] button
for
1 second
or
longer
to switch
to
the
adjustment
selection
display.
2. Press the
[<
..
]
or
[~>]
button and select
"SUB-WOOFER"
.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise
and
select
"ON"
or
"OFF".
4. Press the [T] button
to
return to the previous
mode.
Setting LOW PASS FILTER
The factory default setting
is
"THRGH".
1. Press
and
hold
the
[T] button
for
1
second
or
longer
to switch
to
the
adjustment
selection
display.
2. Press the
[<
..
]
or
[~>]
button to select
"SUB-W
LPF".
3. Turn the [ROTARY]
knob
clockwise
or
coun-
terclockwise to select the setting. Each time
you turn the [ROTARY] knob, the setting
changes
in the following order:
THRGH
-+
LPF
50
=i>
LPF
80
-t
LPF
120
4. Press the [T] button to return to the previous
mode.
AUX
function
This system has an external input
jack
so you
can
listen to
sounds
and
music
from external
devices
connected
to
this unit.
22
OXZ835MP
Selecting AUX IN
sensitivity
Make
the
following settings
to
select
the
sensi-
tivity
when
sounds
from
external
devices
con-
nected
to
this unit are difficult
to
hear
even after
adjusting the volume.
,',
The factory default setting is "MID".
1.
Press and hold the
[T]
button
for
1 second
or
longer
to
switch to the
adjustment
selection
display.
2. Press
the
[<
..
]
or
[~>]
button
to
select
"AUX
SENS".
3. Turn the [ROTARY]
knob
clockwise
or
coun-
terclockwise as
needed
and select from
"HIGH", "MID"
or
"LOW".
4. Press
the
[T] button
to
return
to
the previous
mode.
Triggered audio mute
for
cellular
telepones
This unit reqUires special wiring
to
mute the au-
dio
signal automatically
when
a cellular tele-
phone
rings in the car.
This function
is
not compatible with all cellular
telepones Contact your local authorized Clarion
dealer for information
on
proper installation and
compatibility.
Setting the
clock
1.
Press and hold the [T] button for 1 second
or
longer
to switch to
the
adjustment
selection
display.
2.
Press the
[<
..
]
or
[...
>]
button
to
select
"CLOCK".
3. Press the
[~II]
button.
4. Press the
[<
..
]
or
[~>]
button to select the
hour
or
the minute.
5.
Turn the [ROTARY] knob
clockwise
or
coun-
terclockwise to set
the
correct
time.
The clock
is
displayed
in
12-hour format.
6.
Press the
[~II]
button
to
store the time into
memory.
7.
Press the [T] button
to
return to the previous
mode.
Note.-
•
You
cannot set the clock when it is displayed with
only the ignition
on.
If you drain
or
remove the
cars
battery or take out this unit, the clock is
re-
set
While setting the clock.
if
another button or
operation is selected. the clock set mode
is
canceled.