Owner`s manual
Radio Operations
2.
Press the
[<<I11III]
or
["->J
button
to
automatically seek a station.
When the
[..->]
button is pressed, the station
is
sought
in
the direction of higher frequencies; if
the
[<<l1li]
button is pressed, the station is sought
in
the direction of lower frequencies.
Manual tuning
There are 2 ways available:
Quick
tuning and
step tuning.
When you are
in
the step tuning mode, the fre-
quency changes one step at a time.
In
the quick
tuning mode, you can quickly tune the desired
frequency.
1. Press the [BND] button and select the de-
sired band (FM or AM).
"
If
"MANU"
is
not lit
in
the display, press and
hold the [BND] button
for
1 second or longer.
"MANU"
is
lit
in
the display and manual tuning
is now available.
2. Tune into a station.
•
Quick
tuning:
Press and hold the
[<<l1li]
or
[..->]
button for 1
second
or
longer to tune
in
a station.
.Step
tuning:
Press the
[<<l1li]
or
[..->]
button to manually
tune in a station.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio sta-
tions
in
memory. Pressing the corresponding
[DIRECT] button recalls the stored radio fre-
quency automatically.
1.
Press the [BND] button and select the de-
sired band (FM or
AM).
2.
Press the corresponding [DIRECT] button to
recall the stored station.
Press and hold one of the [DIRECT] buttons
for 2 seconds
or
longer
to
store that station
into preset memory.
Manual memory
"I,
Select the desired station with seek tuning,
manual tuning
or
preset tuning.
2. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
Auto
store
I.
Auto store is a function for storing up to 6 sta-
tions that are automatically tuned in sequen-
tially. If 6 receivable stations cannot be received,
a previously stored station remains
unoverwritten at the memory position.
1. Press the [BND] button and select the de-
sired band (FM or AM).
2.
Press and hold the
[PIA]
button for 2 sec-
onds
or
longer. The stations with good recep-
tion are stored automatically to the preset
channels.
,',
If
auto store
is
performed
in
the
FM
bands, the
stations are stored
in
FM3 even if
FM1
or
FM2
was chosen for storing stations.
Preset scan
Preset scan receives the stations stored
in
pre-
set memory in order. This function is useful
when searching for a desired station in memory.
1.
Press the
[PIA]
button.
2.
When a desired station is tuned in, press the
[PIA]
button again to continue receiving that
station.
Note:
> Be careful not
to
press
and
hold the [PIA] button
for
2 seconds
or
fonger, otherwise the auto store
function
is
engaged and the unit starts storing
stations.
Instant station recall (ISR)
Instant station recall is a special radio preset
that instantly accesses a favorite radio station at
a touch of a button. The ISR function even oper-
ates with the unit
in
other modes.
elSR
memory
i.
Select the station that you wish to store
in
iSR
memory.
2.
Press and hold the
[I]
button for 2 seconds or
longer,
•
Recalling
a
station
with
iSR
In
any mode, press the
[I]
button to turn on the
radio function and tune the selected radio sta-
tion. "ISR" appears
in
the display. Press the [I]
button again to return to the previous mode.
OXZ835MP
15