Owner`s manual

DXZ848RMC 25
English
● TRACK REC
1. Press the [FNC] button to select the CD/MP3
mode.
2. Play back a track to be recorded and press
the [REC] button. Then, the “REC” indicator
on the display and the [REC] button blink,
“TRACK REC” shows on the title display for
2 seconds, and recording starts.
∗ When recording is complete, the “REC” indica-
tor goes off and “REC DONE” shows on the
display for 2 seconds.
● DISC REC
1. Press the [FNC] button to select the CD/MP3
mode.
2. Play back a CD to be recorded and press
and hold the [REC] button for 2 seconds or
longer. Then, the “REC” indicator on the dis-
play and the [REC] button blink, “DISC REC”
shows on the display for 2 seconds, and re-
cording starts.
∗ When recording is complete, the “REC” indica-
tor goes off and “REC DONE” shows on the
display for 2 seconds.
Canceling recording
1. To suspend recording, press the [REC] but-
ton again. Then, recording is canceled.
The display shows “CANCELED” for 2 sec-
onds and then the playback of the CD contin-
ues.
Notes:
• Recording also can be canceled by pressing the
[FNC] or [ Q ] button.
• When recording is canceled, the file that has
been recorded incompletely is deleted.
Erasing operation (ERASE function)
Erasing recordings made using MUSIC
CATCHER is performed in the M.CATCHER
mode and the following 3 erasing modes are
available.
“FILE ERASE” : erase only one file.
“FOLDER ERASE” : erase the whole folder.
“ALL ERASE” : erase all the contents of
the flash memory.
1. Press the [FNC] button to select the
M.CATCHER mode.
2. Each time you press the [ERASE] button, the
display switches in the following order:
FILE ERASE ➜ FLD ERASE ➜ Normal
mode
Notes:
• When a selected file or folder is erased, the ap-
proximate recordable time is shown (the record-
able time shown varies according to the set re-
cording mode).
• Do not turn off the power to the unit or switch the
operation mode during erasing recordings.
● FILE ERASE
1. Press the [FNC] button to select the
M.CATCHER mode.
2. Play back a file to be erased, and press the
[ERASE] button to select “FILE ERASE”.
3. While “FILE ERASE” is showing on the dis-
play, press and hold the [ ] button for 2
seconds or longer. The title display shows
“ERASING” as the file currently being played
back is erased.
● FOLDER ERASE
1. Press the [FNC] button to select the
M.CATCHER mode.
2. Play back any track of the folder to be
erased, and press the [ERASE] button to se-
lect “FLD ERASE”.
3. While “FLD ERASE” is showing on the dis-
play, press and hold the [ ] button for 2
seconds or longer. The title display shows
“ERASING” as the folder currently being
played back is erased.
● ALL ERASE
1. Press the [FNC] button to select the
M.CATCHER mode.
2. Press the [ERASE] button for 2 seconds or
longer to select “ALL ERASE”.
3. While “ALL ERASE” is showing on the dis-
play, press and hold the [ ] button for 2
seconds or longer. The title display shows
“ERASING” as ALL ERASE is executed.
Remaining capacity of the memory
By pressing the [REC] button while in the
M.CATCHER mode, the remaining capacity of
the flash memory can be displayed for 4 sec-
onds as an approximate recordable time in “MM
(minute): SS (second)”.
The title display shows “AVIL. 123:45”.
Note:
• The recordable time shown varies according to
the set recording mode
MUSIC CATCHER Operations