Owner`s manual

CD Changer Operations
Procedure to
scroll a title
Set "SCROLL" to "ON" or "OFF".
(The factory default setting is "ON". Refer to the
subsection "Turning
the screen saver function
on or off" in section "Operation common to
each mode".)
e When
set to "ON"
The title is automatically kept scrolling.
eWhen set to "OFF"
To scroll just 1 time when the title was changed
or the [T] button was pressed for 1 second or
longer.
Selecting a CD
Press the [UP] or [ON] button to select the
desired disc.
*If a CD is not loaded in a slot of magazine, pressing
the [UP] or [ON] button can not work.
Other various play functions
e Disc scan play
Disc scan play locates and plays the first 10
seconds of the first track on each disc
in the
currently selected CD changer. This function
continues automatically until it is cancelled.
*Disc scan play is useful when you want to select a
desired CD.
1. Press and hold the [SCN] button for 1
second or longer. "ALL···" and "SeN" light
in
the display and disc scan play starts.
e Disc repeat play
After all the tracks on the current disc have
been played, disc repeat play automatically
replays the current disc over from the first track.
This function continues automatically until it is
cancelled.
1
.. Press and hold the [RPT] button for 1 second
or longer. "ALL···" and "RPT" light
in the
display and disc repeat play starts.
e Disc random play
The disc random play selects and plays
individual tracks or discs automatically in no
particular order. This function continues
automatically until it is cancelled.
1. Press and hold the [ROM] button for 1
second or longer. "ALL···" and "ROM" light
in
the display and disc random play starts.
e To cancel play
1. Press the operating button previously
selected.
TV Operations
Note:
• The following operations are performed the same
as for radio mode:
* Channel selection
* Storing channels in memory
* Calling channels from memory
* Auto store
* Preset scan
See "Radio Operations" (page 14-15) for details.
TV tuner functions
When an optional TV tuner is connected through
the CeNET cable, this unit controls all TV tuner
functions.
To watch TV requires a TV tuner and
monitor.
Watching a TV
1 ~ Press the [SRC] button and select the TV mode.
2. Press the [BNO] button to select the desired
TV band
(TV1 or TV2). Each time the button
is pressed, the input selection toggles
between
TV1 and TV2.
3. Press the [<~, ~>] lever upward or
downward to tune
in the desired TV station.
Watching a video
The TV tuner has a VTR input terminal to which
1 external device can be connected. Connect a
12 V video cassette player (VCP) or video
cassette recorder (VCR) to the TV tuner input
terminal.
1. Press and hold the [AOJ] button for 1 second
or longer to select VTR.
2. To return to the TV broadcast, press and
hold the [AOJ] button for 1 second or longer.
Setting the TV diver
You can change the reception setting for the TV
antenna connected to the TV tuner.
1. Press the [AOJ] button to switch to the
adjustment selection display.
2. Press the [<~, ~>] lever upward or
downward to select "TV OlVER".
3. Turn the [ROTARY] knob clockwise to set to
"ON" or counterclockwise to set to "OFF".
eON:
Sets the diver setting to ON.
eOFF:
Sets the diver setting to OFF.
4. Press the [AOJ] button to return to the
previous mode.
DXZ555MP 23